#include <ArduinoJson.h>
#include <Arduino.h>
#include <SPI.h>
#include <Ethernet.h>
#include <MQTT.h>
#include <LiquidCrystal_I2C.h>
#include <LiquidMenu.h>
#include <Button.h>
#include <MD_REncoder.h>

// Pin definitions
#define encoderCLK 2
#define encoderDT 3
#define encoderBTN 4
#define kettlePWM 5

#define TOPIC_PREFIX "brewery/"
#define BKTOPIC "setpoint/bk"

// Global variables.
byte kettle_duty = 0;
bool kettle_on = false;

// User I/O objects.
Button enter(encoderBTN);
MD_REncoder rotary = MD_REncoder(encoderDT, encoderCLK);
LiquidCrystal_I2C lcd(0x27,20,4);

float output = 0;
int updateInterval = 1000;

byte mac[] = { 0xA6, 0x61, 0x0A, 0xAE, 0x89, 0xDE }; //physical mac address
IPAddress ip(192,168,1,177);
IPAddress myDns(192, 168, 0, 1);

EthernetClient net;
MQTTClient mqtt_client;

unsigned long lastRun = 0;

// Return a character array to represent the
// On/Off state of the kettle.
char* kettle_state() {
  if (kettle_on) {
    return (char*)"On";
  } else {
    return (char*)"Off";
  }
}

// Interrupt function to run when encoder is turned.
//
// Increases/decreases the kettle output to a max
// of 100% and minimum of 0%.
void doEncoder()
{
  uint8_t result = rotary.read();

  if (result == DIR_CW && kettle_duty < 100) {
    kettle_duty++;
  } else if (result == DIR_CCW && kettle_duty > 0) {
    kettle_duty--;
  }

}

// LCD menu setup.

LiquidLine kettle_state_line(0, 0, "Boil Kettle      ", kettle_state);
LiquidLine kettle_power_line(0, 1, "Kettle Power %   ", kettle_duty);

LiquidScreen home_screen(kettle_state_line, kettle_power_line);

LiquidMenu menu(lcd);

void setup() {

  unsigned long lastRun = millis() - updateInterval;
  Serial.begin(9600);
  rotary.begin();
  Ethernet.begin(mac, ip);
  Serial.println("Setting up...");

  attachInterrupt(digitalPinToInterrupt(encoderCLK), doEncoder, CHANGE);
  attachInterrupt(digitalPinToInterrupt(encoderDT), doEncoder, CHANGE);

  pinMode(encoderCLK, INPUT_PULLUP);
  pinMode(encoderDT, INPUT_PULLUP);
  pinMode(encoderBTN, INPUT_PULLUP);

  // if you get a connection, report back via serial:
  if (net.connect("www.google.com", 80)) {
    Serial.print("you connected to ");
    Serial.println(net.remoteIP());
    // Make a HTTP request:
    net.println("GET /search?q=arduino HTTP/1.1");
    net.println("Host: www.google.com");
    net.println("Connection: close");
    net.println();
    SetupMQTT("192.168.1.198");
  } else {
    // if you didn't get a connection to the server:
    Serial.println("connection failed");
  }

  lcd.init();
  lcd.backlight();

  menu.init();
  menu.add_screen(home_screen);
  menu.update();

};

void update_boil_kettle(){
  static byte last_kettle_duty = 0;

  if (enter.pressed()) {
    kettle_on = !kettle_on;
    menu.update();
  }

  if (last_kettle_duty != kettle_duty) {
    last_kettle_duty = kettle_duty;
    menu.update();
  }

  if (kettle_on) {
    slowPWM(kettlePWM, kettle_duty, 1000);
  } else {
    slowPWM(kettlePWM, 0, 1000);
  }
}

void loop() {
  update_boil_kettle();

  unsigned long elapsedTime = (millis() - lastRun);

  if (elapsedTime >= updateInterval) {
    mqtt_client.loop();
    //if (!mqtt_client.connected()) ConnectMQTT();

    sendSensorData();
    lastRun = millis();
  }

}