Updated docs for 1.0

src_docs/source/configuration.rst

@@ -301,6 +301,10 @@ This is the max amount of deviation allowed for a stable reading.
 This is the maximum devation on the formlula allowed for it to be accepted. Once the formula has been derived it will be validated against the supplied 
 data and of the deviation on any point is bigger the formula will be rejected.
 
+* **Ignore angles below water:**
+
+If this option is checked any angles below that of SG 1 will be discarded as invalid and never sent to any server. Default = off.
+
 * **DS18B20 Resolution:**
 
 Define the resolution used on the temp sensor. 9 bits is default and will give an accuracy of 0.5C, 12 bits will give an accuracy of 0.0625C but will also 

src_docs/source/index.rst

@@ -7,7 +7,10 @@ Welcome to GravityMon's documentation!
 ######################################
 
 .. note::
-  This documentation reflects **v1.0**. Last updated 2022-04-29
+  This documentation reflects **v1.0**. Last updated 2022-05-06
+
+* Docs for: `v0.8 <https://mp-se.github.io/gravitymon/v0.8index.html>`_
+* Docs for: `v0.9 <https://mp-se.github.io/gravitymon/v0.9/index.html>`_
 
 .. image:: images/gravitymon.gif
   :width: 800

src_docs/source/installation.rst

@@ -122,7 +122,7 @@ Before pressing save on the network infomration, make a note of the devicename t
 in the next step to access the configuration pages. The link would look like this: **http://gravitymon56EA34.local**
 
 Under wifi settings you can define a primary and seconday wifi SSID. The seconday will be used in case the primary fails. If the seconday is 
-successful then it will be used as primary.
+successful then it will be used as primary. *The second wifi setting is optional and not needed.*
 
 .. image:: images/wifi.png
   :width: 200