Updated docs for 1.0
@ -301,6 +301,10 @@ This is the max amount of deviation allowed for a stable reading.
|
|||||||
This is the maximum devation on the formlula allowed for it to be accepted. Once the formula has been derived it will be validated against the supplied
|
This is the maximum devation on the formlula allowed for it to be accepted. Once the formula has been derived it will be validated against the supplied
|
||||||
data and of the deviation on any point is bigger the formula will be rejected.
|
data and of the deviation on any point is bigger the formula will be rejected.
|
||||||
|
|
||||||
|
* **Ignore angles below water:**
|
||||||
|
|
||||||
|
If this option is checked any angles below that of SG 1 will be discarded as invalid and never sent to any server. Default = off.
|
||||||
|
|
||||||
* **DS18B20 Resolution:**
|
* **DS18B20 Resolution:**
|
||||||
|
|
||||||
Define the resolution used on the temp sensor. 9 bits is default and will give an accuracy of 0.5C, 12 bits will give an accuracy of 0.0625C but will also
|
Define the resolution used on the temp sensor. 9 bits is default and will give an accuracy of 0.5C, 12 bits will give an accuracy of 0.0625C but will also
|
||||||
|
Before Width: | Height: | Size: 42 KiB After Width: | Height: | Size: 32 KiB |
Before Width: | Height: | Size: 40 KiB After Width: | Height: | Size: 40 KiB |
Before Width: | Height: | Size: 44 KiB After Width: | Height: | Size: 58 KiB |
Before Width: | Height: | Size: 22 KiB After Width: | Height: | Size: 23 KiB |
Before Width: | Height: | Size: 36 KiB After Width: | Height: | Size: 37 KiB |
Before Width: | Height: | Size: 90 KiB After Width: | Height: | Size: 110 KiB |
Before Width: | Height: | Size: 78 KiB After Width: | Height: | Size: 76 KiB |
Before Width: | Height: | Size: 59 KiB After Width: | Height: | Size: 49 KiB |
Before Width: | Height: | Size: 4.5 MiB After Width: | Height: | Size: 7.4 MiB |
Before Width: | Height: | Size: 53 KiB After Width: | Height: | Size: 71 KiB |
Before Width: | Height: | Size: 14 KiB After Width: | Height: | Size: 73 KiB |
@ -7,7 +7,10 @@ Welcome to GravityMon's documentation!
|
|||||||
######################################
|
######################################
|
||||||
|
|
||||||
.. note::
|
.. note::
|
||||||
This documentation reflects **v1.0**. Last updated 2022-04-29
|
This documentation reflects **v1.0**. Last updated 2022-05-06
|
||||||
|
|
||||||
|
* Docs for: `v0.8 <https://mp-se.github.io/gravitymon/v0.8index.html>`_
|
||||||
|
* Docs for: `v0.9 <https://mp-se.github.io/gravitymon/v0.9/index.html>`_
|
||||||
|
|
||||||
.. image:: images/gravitymon.gif
|
.. image:: images/gravitymon.gif
|
||||||
:width: 800
|
:width: 800
|
||||||
|
@ -122,7 +122,7 @@ Before pressing save on the network infomration, make a note of the devicename t
|
|||||||
in the next step to access the configuration pages. The link would look like this: **http://gravitymon56EA34.local**
|
in the next step to access the configuration pages. The link would look like this: **http://gravitymon56EA34.local**
|
||||||
|
|
||||||
Under wifi settings you can define a primary and seconday wifi SSID. The seconday will be used in case the primary fails. If the seconday is
|
Under wifi settings you can define a primary and seconday wifi SSID. The seconday will be used in case the primary fails. If the seconday is
|
||||||
successful then it will be used as primary.
|
successful then it will be used as primary. *The second wifi setting is optional and not needed.*
|
||||||
|
|
||||||
.. image:: images/wifi.png
|
.. image:: images/wifi.png
|
||||||
:width: 200
|
:width: 200
|
||||||
|