Merge branch 'master' into bs5

This commit is contained in:
Magnus Persson 2022-04-26 19:52:44 +02:00
commit 0fe9bb146d
5 changed files with 27 additions and 4 deletions

View File

@ -36,7 +36,7 @@ jobs:
git config --global advice.detachedHead false
- name: Run PlatformIO
run: pio run -e gravity-release -e gravity-perf -e gravity32-release
run: pio run -e gravity-release -e gravity-perf -e gravity32-release -e gravity32-perf
- uses: EndBug/add-and-commit@v7 # You can change this to use a specific version. https://github.com/marketplace/actions/add-commit
with:

Binary file not shown.

After

Width:  |  Height:  |  Size: 4.5 MiB

View File

@ -7,8 +7,12 @@ Welcome to GravityMon's documentation!
######################################
.. note::
This documentation reflects **v0.9**. Last updated 2022-03-14
This documentation reflects **v0.9**. Last updated 2022-04-23
.. image:: images/gravitymon.gif
:width: 800
:alt: User Inteface Walkthrough
GravityMon is used to measure gravity and temperature during fermentation of beer and report the progress. The graph below is
an example on how the fermentation process can be tracked. This is from my last brew that was over on a few days. The graph is rendered using
Fermentrack.

View File

@ -110,14 +110,32 @@ Configuring WIFI
================
When the device is flashed it will need to have WIFI configuration in order to work. If you have used other software on
the device its possible that wifi settings exist.
the device its possible that wifi settings already exist.
If this is not configured in the device it will create an wirless access point called `GravMon`. The default password is `password`.
Connect to this AP and enter the SSID and password you want to use. If the web page dont open automatically you can enter the following adress
in the browser: **http://192.168.4.1**
Before pressing save on the network infomration, make a note of the devicename that is shown on the screen, this will be the name that is used
in the next step to access the configuration pages. The link would look like this: **http://gravitymon56EA34.local**
.. image:: images/wifi.png
:width: 200
:alt: Wifi page
.. _setup_ip:
Finding the device adress
=========================
Once the wifi network settings have been added then the device will reboot and connect to your network. If the blue led is flashing then it's up and running and is ready to be configured.
If your computer supports mDNS the adress you saw before can be used in your web browser to connect to the device. Windows does not have the best support for mDNS so if you are having issues
with finding the network name you can try the following:
* Check your wireless router for the IP adress and use that to connect instead, for example; http://192.168.1.56
* Download an IP scanner / Port Scanner on your Windows computer or mobile device and use that to find what devices are listening on port 80.
Once you can access the user interface then proceed to the next step.

View File

@ -14,6 +14,7 @@ v1.0.0
* Added advanced settings to configuration for adjusting some internal values (gyro reads, accepted formula deviation, moving detection).
* Added additional http error codes to troubleshooting documentation
* Added tooltips to all fields in user interface
* Installation instructions updated on how to find the device after wifi has been configured.
* BUG: Fixed issue in formula calculation in case there were a gap in the data series
* BUG: Field name for wifi strenght changed from "rssi" to "RSSI"