Updated esp32 debug target

platformio.ini

@@ -104,7 +104,7 @@ build_type = release
 board_build.filesystem = littlefs
 
 [env:gravity32-release]
-framework = arduino
+framework = ${common_env_data.framework}
 platform = ${common_env_data.platform32}
 upload_speed = ${common_env_data.upload_speed}
 monitor_speed = ${common_env_data.monitor_speed}
@@ -124,7 +124,6 @@ board = wemos_d1_mini32
 build_type = release
 board_build.partitions = part32.csv
 board_build.filesystem = littlefs 
-monitor_filters = esp32_exception_decoder
 board_build.embed_txtfiles =
   html/calibration.min.htm
   html/config.min.htm
@@ -135,9 +134,9 @@ board_build.embed_txtfiles =
   html/test.min.htm
 
 [env:gravity32c3-release]
-framework = arduino
+framework = ${common_env_data.framework}
 platform = ${common_env_data.platform32}
-upload_speed = 115200
+upload_speed = ${common_env_data.upload_speed}
 monitor_speed = ${common_env_data.monitor_speed}
 extra_scripts = ${common_env_data.extra_scripts}
 build_unflags = 
@@ -157,7 +156,6 @@ board = lolin_c3_mini
 build_type = release
 board_build.partitions = part32.csv
 board_build.filesystem = littlefs 
-monitor_filters = esp32_exception_decoder
 board_build.embed_txtfiles =
   html/calibration.min.htm
   html/config.min.htm
@@ -168,17 +166,14 @@ board_build.embed_txtfiles =
   html/test.min.htm
 
 [env:gravity32c3-debug]
-framework = arduino
+framework = ${common_env_data.framework}
 platform = ${common_env_data.platform32}
-upload_speed = 115200
+upload_speed = ${common_env_data.upload_speed}
 monitor_speed = ${common_env_data.monitor_speed}
+monitor_filters = time, colorize, log2file, esp32_exception_decoder
 extra_scripts = ${common_env_data.extra_scripts}
-debug_tool = custom
-debug_server = 
-	${platformio.packages_dir}/tool-openocd-esp32/bin/openocd 
-	-f 
-	${platformio.packages_dir}/tool-openocd-esp32/share/openocd/scripts/board/esp32c3-builtin.cfg
-debug_port = localhost:3333
+upload_port = COM8
+debug_tool = esp-prog
 debug_init_break = break setup
 build_unflags = 
 	-DCFG_DISABLE_LOGGING 
@@ -195,19 +190,21 @@ build_flags =
 	-Wl,-Map,output.map
 	${common_env_data.build_flags}
 	-DLOG_LEVEL=6
-	-DCORE_DEBUG_LEVEL=0
+	-DCORE_DEBUG_LEVEL=5
+	-DJTAG_DEBUG
   -DESP32C3
 	-DARDUINO_ESP32C3_DEV
+	#-DARDUINO_USB_MODE=1
+	#-DARDUINO_USB_CDC_ON_BOOT=1
 	-DCOLLECT_PERFDATA	# Collect runtime data for a few defined methods to measure time, dumped to serial and/or influxdb 
 lib_deps = 
 	${common_env_data.lib_deps}
 	${common_env_data.lib_deps32}
 lib_ignore = 
-board = lolin_c3_mini 
+board = esp32-c3-devkitm-1
 build_type = debug
 board_build.partitions = part32.csv
 board_build.filesystem = littlefs 
-monitor_filters = esp32_exception_decoder
 board_build.embed_txtfiles =
   html/calibration.min.htm
   html/config.min.htm
@@ -218,9 +215,9 @@ board_build.embed_txtfiles =
   html/test.min.htm
 
 ; [env:gravity32s2-release]
-; framework = arduino
+; framework = ${common_env_data.framework}
 ; platform = ${common_env_data.platform32}
-; upload_speed = 115200
+; upload_speed = ${common_env_data.upload_speed}
 ; monitor_speed = ${common_env_data.monitor_speed}
 ; extra_scripts = ${common_env_data.extra_scripts}
 ; build_unflags = 
@@ -240,7 +237,6 @@ board_build.embed_txtfiles =
 ; build_type = debug
 ; board_build.partitions = part32.csv
 ; board_build.filesystem = littlefs 
-; monitor_filters = esp32_exception_decoder
 ; board_build.embed_txtfiles =
 ;   html/calibration.min.htm
 ;   html/config.min.htm

src/main.hpp

@@ -52,8 +52,14 @@ extern RunMode runMode;
 #define ESPhttpUpdate httpUpdate
 #define ESP_RESET ESP.restart
 #define ESP8266WebServer WebServer
+#if defined(JTAG_DEBUG)
+#define PIN_SDA 8
+#define PIN_SCL 9
+#warning "ESP32C3 JTAG debugging enabled, using GYRO on GPIO 8/9"
+#else
 #define PIN_SDA 7
 #define PIN_SCL 6
+#endif
 #define PIN_DS A3
 #define PIN_A0 A0
 // This should be the LED_BUILTIN, but that is also connected SDA (Gyro) so we cannot use both. So we point LED to pin 8 which is not used.