Brewery/gravitymon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Pre update of docs for v1.0

Browse Source
This commit is contained in:
Magnus Persson
2022-04-29 20:08:02 +02:00
parent a40c3528d4
commit 3a4cfb1ca5
17 changed files with 95 additions and 50 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
src_docs/source/functionallity.rst
View File

@ -33,10 +33,10 @@ The main features
Currently the device supports the following endpoints.
* http or https
* influxdb v2
* http (ssl optional)
* influxdb v2 (ssl optional)
* MQTT (ssl optional)
* Brewfather
* MQTT
* Home Assistant
* Brew Spy
* Brewers Friend
@ -65,11 +65,9 @@ The main features
Another big difference is that this software can create the gravity formula in the device, just enter the
angle/gravity data that you have collected. You will also see a graph simulating how the formula would work.
Currently the device can handle 5 data points which should be enough to get a accurate formula. At least 3 data points
Currently the device can handle 10 data points which should be enough to get a accurate formula. At least 3 data points
is needed to get an accurate formula.
If there is a need for more data points, raise a comment on github.
* **Customize the data format beeing sent to push targets**
In order to make it easier to support more targets there is a built in format editor that can be used to
@ -86,7 +84,8 @@ The main features
* **OTA support from webserver**
When starting up in configuration mode the device will check for a software update from a webserver. This is an easily
way to keep the software up to date. In the future I might add a hosted endpoint for providing updates.
way to keep the software up to date. In the future I might add a hosted endpoint for providing updates. OTA can also be
done over a SSL connection.
* **DS18B20 temperature adjustments**
@ -95,13 +94,14 @@ The main features
* **Gyro Movement**
The software will detect if the gyro is moving and if this is the case it will go back to sleep for 60seconds.
This way we should avoid faulty measurements and peaks in the graphs.
The software will detect if the gyro is moving and if this is the case it will go back to sleep for 60 seconds.
This way we should avoid faulty measurements and peaks in the graphs.
* **WIFI connection issues**
The software will not wait indefiently for a wifi connection. If it takes longer than 20 seconds to connect then
the device will go into deep sleep for 60 seoncds and then retry later. This to conserve batter as much as possible.
the device will try the seconday wifi configuration, and that also failes it will go into deep sleep for 60 seconds and then
retry later. This to conserve batter as much as possible.
* **Use gyro temperature sensor**