From f2112cb34432ffafeed65fb2f42e76df1c2c2d3f Mon Sep 17 00:00:00 2001
From: Magnus Persson <magnus@noreply.github.com>
Date: Sun, 30 Jan 2022 17:22:38 +0100
Subject: [PATCH] Added intro section to docs

---
 src_docs/source/index.rst        |  3 +-
 src_docs/source/installation.rst |  4 ++
 src_docs/source/intro.rst        | 69 ++++++++++++++++++++++++++++++++
 3 files changed, 75 insertions(+), 1 deletion(-)
 create mode 100644 src_docs/source/intro.rst

diff --git a/src_docs/source/index.rst b/src_docs/source/index.rst
index eff9733..2313942 100644
--- a/src_docs/source/index.rst
+++ b/src_docs/source/index.rst
@@ -121,9 +121,10 @@ the following libraries and without these this would have been much more difficu
    :caption: Contents:
 
    license
-   releases
    functionallity
+   intro
    installation
+   releases
    configuration
    formula
    services
diff --git a/src_docs/source/installation.rst b/src_docs/source/installation.rst
index eb6bfda..fbd9a6a 100644
--- a/src_docs/source/installation.rst
+++ b/src_docs/source/installation.rst
@@ -1,3 +1,5 @@
+.. _installation:
+
 Installation 
 ------------
 
@@ -57,6 +59,8 @@ Just select a baud rate of 115200, 8N1.
   :width: 800
   :alt: Serial output
 
+.. _setup_wifi:
+
 Configuring WIFI
 ================
 
diff --git a/src_docs/source/intro.rst b/src_docs/source/intro.rst
new file mode 100644
index 0000000..56c4be1
--- /dev/null
+++ b/src_docs/source/intro.rst
@@ -0,0 +1,69 @@
+.. _getting_started:
+
+Getting started
+===============
+
+First you need a completed iSpindle hardware, there are several resouces around that topic so it 
+will not be covered in this documentation. Please visit `iSpindel Homepage <https://www.ispindel.de>`_  for 
+more information.
+
+Step 1 - Flash the device
+-------------------------
+
+The first step is to flash the firmware, I recommend using Brewflasher as the easy option. Detailed 
+instructions can be found here :ref:`installation`
+
+Step 2 - Setup WIFI
+-------------------
+
+When the device starts up the first time it will first start an WIFI access point so that the WIFI Settings 
+can be configured. The instructions for that can be found here :ref:`_setup_wifi`
+
+Step 3 - Configuration
+----------------------
+
+Once the device can connect to WIFI it will go into `configuration mode` and start a web server for 
+doing the initial configuration. In order to access the device you will need to find its name or ip adress.
+
+It will broadcast a name like gravitymonXXXXXX.local over mDNS. Where the XXXXXX is the unique device id. You can 
+find the name via an mDNS browser, check your router or connect the device to a serial monitor. On windows mDNS 
+might not work so then use the IP address instead. Once connected you will meet a web interface that looks like this.
+
+.. image:: images/index.png
+  :width: 800
+  :alt: Index page
+
+The next step is then to configure the device, most settings should work but there are a few that should be changed.
+
+Configuration - Device Settings - Device Name
++++++++++++++++++++++++++++++++++++++++++++++
+
+Give your device a good name.
+
+Configuration - Device Settings - Calibration
++++++++++++++++++++++++++++++++++++++++++++++
+
+You need to place the device on a flat surface and then press the 
+calibrate button. It will take a few seconds for this to complete and the angle should be close to 90 degress. Without 
+calibration the device will not go into gravity mode.
+
+Configuration - Push Settings
++++++++++++++++++++++++++++++
+Add the endpoints where you want data to be transmitted. All URLs that contain a 
+valid endpoint will receive the data.
+
+Calibration 
++++++++++++
+
+I recommend to use the calibration feature to create a gravity formula. If you have values from a 
+previous calibration then you can add them here, if not follow the calibration guidelines on the iSpindle site.
+
+Step 4 - Completed
+------------------
+
+You are now done and can enjoy the GravityMon software. Check out the :ref:`setting-up-device` section for other configuration options.
+
+If you want to enter the configuration mode place the device flat on a surface and do a reset (or wait until it wakes up). 
+Its recommended to attach the device to power when you have it in `configuration mode` so the battery is not drained. 
+
+**If you have suggestions for more awesome features, head over to the github repository and make a request.**