From 6b649070e13fef31ba635b9b59ef29c17ade2221 Mon Sep 17 00:00:00 2001 From: Jeremiah Njoroge Date: Thu, 15 Sep 2022 10:16:11 -0700 Subject: [PATCH] Typo fixes in formula doc --- src_docs/source/formula.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/src_docs/source/formula.rst b/src_docs/source/formula.rst index 67384e2..de36022 100644 --- a/src_docs/source/formula.rst +++ b/src_docs/source/formula.rst @@ -9,7 +9,7 @@ Create formula Here you can enter up to 10 values (angles + gravity) that is then used to create the formula. Angles equal to zero will be regarded as empty even if there is a gravity reading. -When you submit the values the device will try create a forumla with increasing level of complexity. It will start +When you submit the values the device will try create a formula with increasing level of complexity. It will start with a order 2 formula and then try 3 and 4. Once the formula has been created it will validate the formula against the supplied angles/gravity and if there is a too @@ -21,14 +21,14 @@ Under the Error Log you will also find hints to what problem the formula creator `CALC: Validation failed on angle 33.430000, deviation too large 3.14, formula order 2` -This means that the angle 33.43 had a deviation of 5.8 SG and since the default threashold is 3, it will fail. You +This means that the angle 33.43 had a deviation of 5.8 SG and since the default threshold is 3, it will fail. You can also see that it has failed on that point in both a order 2 and 4 formula. .. image:: images/qa_1.png :width: 400 :alt: Example of deviating value -So in this case you can either increase the threashold or remove the angle that has an issue. You can also +So in this case you can either increase the threshold or remove the angle that has an issue. You can also use the graph on the calibration page to identify angles that is probably not correct. .. image:: images/formula2.png