Brewery/gravitymon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update docs

Browse Source
This commit is contained in:
Magnus Persson 2022-04-09 10:49:29 +02:00
parent 10fa71d7ca
commit 786b8e9b19
2 changed files with 3 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
src_docs/source/hardware.rst
View File

@ -17,7 +17,8 @@ I would suggest that you try how it fits into the PET tube before soldering it t
You also need to desolder (remove) the RED ON LED from the ESP32 or the battery power will be reduced a lot.
Final thing is to add a resistor between A0 (Analog PIN) and ground of 470k. The reason is that the esp8266 has a build in resistor which
the esp32 does not have. So in order to get a valid voltage (less than 3.2V) on the A= pin this is needed.
the esp32 does not have. So in order to get a valid voltage (less than 3.2V) on the A0 pin this is needed. Once the modification is done you might
need to adjust the voltage factor so the battery reading is correct.
.. image:: images/esp32.jpg
:width: 500

1
src_docs/source/releases.rst
View File

@ -26,6 +26,7 @@ v0.9.0
* BUG: Temp format name was incorrect in iSpindle format causing receiver to incorrectly read temperature.
* BUG: Temperature sensor adjusmemnt value was not handled properly when using Farenheight.
* BUG: If the ID was to low the device id could end up with a leading space causing errors in data post. Added leading zero to ID.
* BUG: Entering wifi setup and a timeout occured the wifi settings could be deleted.
v0.8.0
------