Brewery/gravitymon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Typo fixes in question and answer doc

Browse Source
This commit is contained in:
Jeremiah Njoroge 2022-09-15 10:42:46 -07:00
parent 059865f271
commit 823d8ca39e
1 changed files with 6 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
src_docs/source/q_and_a.rst
View File

@ -4,14 +4,14 @@ Q & A
My device is no going in to sleep after fully charged
-----------------------------------------------------
- Calibrate the device in the web interface
- Check the angle/tilt. If the device is reporting 90 degress then its not going into sleep. Tilt the device and check if sleep works.
- Check in reported voltage of the battery in the web interface. If this is higher than 4.15V the device belives its beeing charged. In that case adjust the voltage factor under hardware so the voltage drops below 4.15V.
- Check the angle/tilt. If the device is reporting 90 degrees then its not going into sleep. Tilt the device and check if sleep works.
- Check in reported voltage of the battery in the web interface. If this is higher than 4.15V the device believes its being charged. In that case adjust the voltage factor under hardware so the voltage drops below 4.15V.
- Check if the `always on` option is activated in the web interface.
My device reports a temperature of -273C or -491F
-------------------------------------------------
- The DS18B20 temperature sensor cannot be found and this is the default value reported in this case.
- Check the orienation of the sensor and soldering.
- Check the orientation of the sensor and soldering.
Calibration error (unable to find a valid formula)
--------------------------------------------------
@ -28,16 +28,16 @@ To fix these this you can;
- remove the value from the list (setting the angle to zero will do that)
- change the advanced setting (Formula max deviation) to a higher value and save the values again.
In the case above this paramater was changed from 1.6 SG to 4 SG and the formula was accepted. The deviation on this point was just above 3 SG.
In the case above this parameter was changed from 1.6 SG to 4 SG and the formula was accepted. The deviation on this point was just above 3 SG.
User interface does not render correctly
----------------------------------------
Since the user interface is built using bootstrap v5 the device requires access to the internet
to download required javascripts and css files. Due to size it would not be possible to store these
to download required javascript and css files. Due to size it would not be possible to store these
on the device. Make sure the device can access: https://cdn.jsdelivr.net/npm/bootstrap
Data is not popoulated in the fields
Data is not populated in the fields
------------------------------------
The user interface uses JQuery to fetch data from the device. This javascript library needs to be downloaded