9 lines
521 B
ReStructuredText
9 lines
521 B
ReStructuredText
Q & A
|
|
#####
|
|
|
|
My device is no going in to sleep after fully charged
|
|
-----------------------------------------------------
|
|
- Calibrate the device in the web interface
|
|
- Check the angle/tilt. If the device is reporting 90 degress then its not going into sleep. Tilt the device and check if sleep works.
|
|
- Check in reported voltage of the battery in the web interface. If this is higher than 4.15V the device belives its beeing charged. In that case adjust the voltage factor under hardware so the voltage drops below 4.15V.
|