156 lines
8.3 KiB
ReStructuredText
156 lines
8.3 KiB
ReStructuredText
.. _releases:
|
|
|
|
Releases
|
|
########
|
|
|
|
v1.0.0-beta2
|
|
------------
|
|
* Moved applying temp sensor resolution in loop so there is no need to reboot.
|
|
* Advanced software settings is only disabled if settings contain default values.
|
|
* Added button on indexpage to direct to github issues.
|
|
* Added button to extract important information for support requests.
|
|
* Updated docs with information from beta1.
|
|
* First point in gravity formula is now reserved for water gravity, this to allow detection of angles below water that can be filtered out.
|
|
* Added advanced setting to ignore angles that are lower than water. This is disabled by default.
|
|
|
|
v1.0.0-beta1
|
|
------------
|
|
* Upgraded to bootstrap v5.1 for web pages.
|
|
* Added tooltips to all fields in user interface
|
|
* Removed brewfather option (can use standard HTTP options), the old apporach can still be used via changing format template.
|
|
* Added 5 more points for formula creation, so a total of 10 angles/gravity values can be stored.
|
|
* Added function on format page so that it's easy to copy a format template from the docs (simplify service integration).
|
|
* Added https support for Influxdb
|
|
* Added possibility to have variable push intervals for different endpoints so that different frequency can be used, for example; 5min mqtt, 15min brewfather.
|
|
* Added advanced settings: Changes how many times the gyro is read (less reads, quicker but less accurate)
|
|
* Added advanced settings: Set amount of gyro movement is allowed for a accurate read.
|
|
* Added advanced settings: What deviation is acceptable for creating formula deviation
|
|
* Added advanced settings: Various timeouts, wifi connect, wifi portal, http connects.
|
|
* Added advanced settings: Adjust resolution of temp sensor (9 bits to 12 bits), higher resolution takes longer thus reducing batterylife
|
|
* Added additional http error codes to troubleshooting documentation
|
|
* Added possibility to set 2 wifi ssid where the second acts as a fallback in case it fails to connect. If succesful the seconday becomes the new primary.
|
|
* SSL connections are skipped on ESP8266 when in config mode since there is a high probability it will crash due to low memory.
|
|
* Installation instructions updated on how to find the device after wifi has been configured.
|
|
* Documentation on brewfather has been updated to adress SG/Plato conversion
|
|
* BUG: Fixed issue in formula calculation in case there were a gap in the data series
|
|
* BUG: Field name for wifi strength changed from "rssi" to "RSSI"
|
|
* BUG: Fixed issue with probing MFLN on non standard ports
|
|
|
|
v0.9.0
|
|
------
|
|
* Added one http push target that uses HTTP GET. This can be used with ubidots or blynk api's.
|
|
* Added function to test push targets from configuration page. It will send data and show the return code as a first step.
|
|
* Added documetation on how to integrate with Blynk.io using http get.
|
|
* Config page now shows the estimated runtime for the device (based on a full battery and previous average runtime)
|
|
* Experimental release of firmware using an esp32 instead of esp8266
|
|
* Merged index and device pages into one so that all the needed information is available on the index page.
|
|
* Removed api for device (/api/device), it's now merged into the /api/status api.
|
|
* Test function in format editor now uses real data and not fake.
|
|
* Split push configuration into two sections to make it fit better on smaller devices
|
|
* Updated WifiManager and DoubleReset libraries
|
|
* Updated esp32 target with littlefs support
|
|
* Updated esp32 target with BLE send support (it will simulate a tilt)
|
|
* Mounted esp32 d1 mini mounted to a iSpindle PCB 4.0 (CherryPhilip) which worked fine.
|
|
* Documented hardware changes on esp32
|
|
* Default mDNS name is now shown on WIFI setup page.
|
|
* Added option to manually update/downgrade firmware under hardware settings.
|
|
* BUG: Corrected PIN for voltage read on ESP32
|
|
* BUG: If using plato and not gravity formula was defined the value was set to null.
|
|
* BUG: Temp format name was incorrect in iSpindle format causing receiver to incorrectly read temperature.
|
|
* BUG: Temperature sensor adjusmemnt value was not handled properly when using Farenheight.
|
|
* BUG: If the ID was to low the device id could end up with a leading space causing errors in data post. Added leading zero to ID.
|
|
* BUG: Entering wifi setup and a timeout occured the wifi settings could be deleted.
|
|
|
|
v0.8.0
|
|
------
|
|
|
|
* Added option to set http headers (2 per http endpoint), these can be used for
|
|
other http formats than json (default) and for adding authentication headers.
|
|
* Added possibility to view last 10 errors on device page.
|
|
* Added possibility to define token parameter used in iSpindle format.
|
|
* Added instructions for how to configure integration with Brewspy
|
|
* Added instructions for how to configure integration with Thingspeak
|
|
* Added option to do a factory reset via API.
|
|
* Added logging of the runtime, how long a measurement take (last 10 are stored). This can be
|
|
used to check how good the wifi connection is and estimate the lifetime when on battery.
|
|
Check the device page in the UI for this information.
|
|
* Refactored code to free up more RAM to make SSL more stable.
|
|
* Before connecting to an SSL endpoint the device will try to use a new SSL feature
|
|
called MFLN (Maximum Fragment Length Negotiation) that allow us to reduce the buffers
|
|
from 16k to 2k. This can make a huge difference on a device with only 40k RAM. Not all
|
|
servers might support this feature.
|
|
* Updated documentation pages.
|
|
* Tested batterylife, 47 days using an update frequency of 5 min
|
|
|
|
v0.7.1
|
|
------
|
|
|
|
* Added instructions for how to configure integration with Fermentrack
|
|
* Added instructions for how to configure integration with Ubidots
|
|
* Added instructions for how to configure integration with HomeAssistant
|
|
* Added instructions for how to configure integration with Brewers Friend (not verified)
|
|
* BUG: Defined mqtt port was ignored, used default values.
|
|
* BUG: Extended length of HTTP url fields from 100 to 120 chars.
|
|
* BUG: Fixed issue with default template so it now includes the device name correctly.
|
|
|
|
v0.7.0
|
|
------
|
|
|
|
Latest stable version. `Release v0.7 on Github <https://github.com/mp-se/gravitymon/releases/tag/v0.7.0>`_
|
|
|
|
* SSL support for HTTP targets
|
|
* SSL support for MQTT targets
|
|
* SSL support for OTA
|
|
* Added support for Plato
|
|
* Added error handling for calibration page.
|
|
* Added experimental target ESP32 (using an ESP32 D1 Mini which is pin compatible with ESP8266). Not
|
|
really usable since wifi connection is extreamly slow with current Arduino releases (3-8 seconds).
|
|
* Added experimental format editor so users can customize their data format used for pushing data.
|
|
This will reduce the need for custom push targets. As long as the service is supporting http
|
|
or https then the data format can be customized.
|
|
* Added check so that pushing data is not done if memory is low (this will avoid crashes)
|
|
* MQTT topic has been removed from config (handled via format templates)
|
|
* MQTT port port number added. Port over 8000 will activate SSL.
|
|
|
|
* **Breaking change**: To simplify the internal structure the
|
|
temp sensor adjustment is now stored in C. So if you have
|
|
enabled this function using F you will need to go into
|
|
the configuration and update the adjustment factor again (hardware config).
|
|
|
|
* **Breaking change**: The MQTT push option has been changed to match the iSpindle behaviour. If
|
|
the behaviour in v0.6 is wanted this can be done via the format editor.
|
|
|
|
v0.6.0
|
|
------
|
|
|
|
`Release v0.6 on Github <https://github.com/mp-se/gravitymon/releases/tag/v0.6.0>`_
|
|
|
|
* Changed the wifi manager and refactored wifi.cpp
|
|
* LED is now turned on when Wifi Portal is open
|
|
* Refactored main.cpp to make it easier to read
|
|
* Tested runtime performance
|
|
* Improved documentation
|
|
* Added warning on config page when sleep is <300
|
|
* Enabled selection of gyro temperature sensor under Hardware settings
|
|
* Added warning when short sleep interval and gyro temp is enabled
|
|
* Added support for MQTT
|
|
* Bug: MPU init sometimes caused crash during startup.
|
|
|
|
v0.5.0
|
|
------
|
|
|
|
`Release v0.5 on Github <https://github.com/mp-se/gravitymon/releases/tag/v0.5.0>`_
|
|
|
|
* Added feature to calcuate formula on device
|
|
* Total rewrite of documentation
|
|
* WIFI settings are now stored in config file
|
|
* Defined version numbers for all dependant libraries to avoid updates breaking build.
|
|
* Cleanup of code
|
|
* Refactor code from C to C++
|
|
|
|
v0.4.0
|
|
------
|
|
|
|
`Release v0.4 on Github <https://github.com/mp-se/gravitymon/releases/tag/v0.4.0>`_
|
|
|
|
* First release |