Use consistent indenting
Chose 4 spaces because the OpenSCAD editor uses that by default.
This commit is contained in:
parent
70157878b5
commit
07d3dfa9bb
@ -28,27 +28,27 @@
|
|||||||
|
|
||||||
/* [Box dimensions] */
|
/* [Box dimensions] */
|
||||||
// - Longueur - Length
|
// - Longueur - Length
|
||||||
Length = 160;
|
Length = 160;
|
||||||
// - Largeur - Width
|
// - Largeur - Width
|
||||||
Width = 170;
|
Width = 170;
|
||||||
// - Hauteur - Height
|
// - Hauteur - Height
|
||||||
Height = 100;
|
Height = 100;
|
||||||
// - Epaisseur - Wall thickness
|
// - Epaisseur - Wall thickness
|
||||||
Thick = 2;//[2:5]
|
Thick = 2;//[2:5]
|
||||||
|
|
||||||
/* [Box options] */
|
/* [Box options] */
|
||||||
// - Diamètre Coin arrondi - Filet diameter
|
// - Diamètre Coin arrondi - Filet diameter
|
||||||
Filet = 2;//[0.1:12]
|
Filet = 2;//[0.1:12]
|
||||||
// - lissage de l'arrondi - Filet smoothness
|
// - lissage de l'arrondi - Filet smoothness
|
||||||
Resolution = 50;//[1:100]
|
Resolution = 50;//[1:100]
|
||||||
// - Tolérance - Tolerance (Panel/rails gap)
|
// - Tolérance - Tolerance (Panel/rails gap)
|
||||||
m = 0.9;
|
m = 0.9;
|
||||||
// Pieds PCB - PCB feet (x4)
|
// Pieds PCB - PCB feet (x4)
|
||||||
PCBFeet = 1;// [0:No, 1:Yes]
|
PCBFeet = 1;// [0:No, 1:Yes]
|
||||||
// - Decorations to ventilation holes
|
// - Decorations to ventilation holes
|
||||||
Vent = 1;// [0:No, 1:Yes]
|
Vent = 1;// [0:No, 1:Yes]
|
||||||
// - Decoration-Holes width (in mm)
|
// - Decoration-Holes width (in mm)
|
||||||
Vent_width = 1.5;
|
Vent_width = 1.5;
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
@ -99,133 +99,127 @@ Dec_size = Vent ? Thick*2 : 0.8;
|
|||||||
|
|
||||||
/////////// - Boitier générique bord arrondis - Generic rounded box - //////////
|
/////////// - Boitier générique bord arrondis - Generic rounded box - //////////
|
||||||
|
|
||||||
module RoundBox($a=Length, $b=Width, $c=Height){// Cube bords arrondis
|
module RoundBox($a=Length, $b=Width, $c=Height) {// Cube bords arrondis
|
||||||
$fn=Resolution;
|
$fn=Resolution;
|
||||||
translate([0,Filet,Filet]){
|
translate([0,Filet,Filet]) {
|
||||||
minkowski (){
|
minkowski () {
|
||||||
cube ([$a-(Length/2),$b-(2*Filet),$c-(2*Filet)], center = false);
|
cube ([$a-(Length/2),$b-(2*Filet),$c-(2*Filet)], center = false);
|
||||||
rotate([0,90,0]){
|
rotate([0,90,0]) {
|
||||||
cylinder(r=Filet,h=Length/2, center = false);
|
cylinder(r=Filet,h=Length/2, center = false);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
}// End of RoundBox Module
|
} // End of RoundBox Module
|
||||||
|
|
||||||
|
|
||||||
////////////////////////////////// - Module Coque/Shell - //////////////////////////////////
|
////////////////////////////////// - Module Coque/Shell - //////////////////////////////////
|
||||||
|
|
||||||
module Coque(){//Coque - Shell
|
module Coque() {//Coque - Shell
|
||||||
Thick = Thick*2;
|
Thick = Thick*2;
|
||||||
difference(){
|
difference() {
|
||||||
difference(){//sides decoration
|
difference() {//sides decoration
|
||||||
union(){
|
union() {
|
||||||
difference() {//soustraction de la forme centrale - Substraction Fileted box
|
difference() {//soustraction de la forme centrale - Substraction Fileted box
|
||||||
|
difference() {//soustraction cube median - Median cube slicer
|
||||||
difference(){//soustraction cube median - Median cube slicer
|
union() {//union
|
||||||
union() {//union
|
difference() {//Coque
|
||||||
difference(){//Coque
|
|
||||||
RoundBox();
|
RoundBox();
|
||||||
translate([Thick/2,Thick/2,Thick/2]){
|
translate([Thick/2,Thick/2,Thick/2]) {
|
||||||
RoundBox($a=Length-Thick, $b=Width-Thick, $c=Height-Thick);
|
RoundBox($a=Length-Thick, $b=Width-Thick, $c=Height-Thick);
|
||||||
}
|
|
||||||
}//Fin diff Coque
|
|
||||||
difference(){//largeur Rails
|
|
||||||
translate([Thick+m,Thick/2,Thick/2]){// Rails
|
|
||||||
RoundBox($a=Length-((2*Thick)+(2*m)), $b=Width-Thick, $c=Height-(Thick*2));
|
|
||||||
}//fin Rails
|
|
||||||
translate([((Thick+m/2)*1.55),Thick/2,Thick/2+0.1]){ // +0.1 added to avoid the artefact
|
|
||||||
RoundBox($a=Length-((Thick*3)+2*m), $b=Width-Thick, $c=Height-Thick);
|
|
||||||
}
|
|
||||||
}//Fin largeur Rails
|
|
||||||
}//Fin union
|
|
||||||
translate([-Thick,-Thick,Height/2]){// Cube à soustraire
|
|
||||||
cube ([Length+100, Width+100, Height], center=false);
|
|
||||||
}
|
|
||||||
}//fin soustraction cube median - End Median cube slicer
|
|
||||||
translate([-Thick/2,Thick,Thick]){// Forme de soustraction centrale
|
|
||||||
RoundBox($a=Length+Thick, $b=Width-Thick*2, $c=Height-Thick);
|
|
||||||
}
|
|
||||||
}
|
}
|
||||||
|
}//Fin diff Coque
|
||||||
|
difference() {//largeur Rails
|
||||||
difference(){// wall fixation box legs
|
translate([Thick+m,Thick/2,Thick/2]) {// Rails
|
||||||
union(){
|
RoundBox($a=Length-((2*Thick)+(2*m)), $b=Width-Thick, $c=Height-(Thick*2));
|
||||||
translate([3*Thick +5,Thick,Height/2]){
|
}//fin Rails
|
||||||
rotate([90,0,0]){
|
translate([((Thick+m/2)*1.55),Thick/2,Thick/2+0.1]) { // +0.1 added to avoid the artefact
|
||||||
$fn=6;
|
RoundBox($a=Length-((Thick*3)+2*m), $b=Width-Thick, $c=Height-Thick);
|
||||||
cylinder(d=16,Thick/2);
|
}
|
||||||
}
|
}//Fin largeur Rails
|
||||||
}
|
}//Fin union
|
||||||
|
translate([-Thick,-Thick,Height/2]) {// Cube à soustraire
|
||||||
translate([Length-((3*Thick)+5),Thick,Height/2]){
|
cube ([Length+100, Width+100, Height], center=false);
|
||||||
rotate([90,0,0]){
|
|
||||||
$fn=6;
|
|
||||||
cylinder(d=16,Thick/2);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
}
|
||||||
translate([4,Thick+Filet,Height/2-57]){
|
}//fin soustraction cube median - End Median cube slicer
|
||||||
rotate([45,0,0]){
|
translate([-Thick/2,Thick,Thick]) {// Forme de soustraction centrale
|
||||||
cube([Length,40,40]);
|
RoundBox($a=Length+Thick, $b=Width-Thick*2, $c=Height-Thick);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
translate([0,-(Thick*1.46),Height/2]){
|
|
||||||
cube([Length,Thick*2,10]);
|
difference() {// wall fixation box legs
|
||||||
}
|
union() {
|
||||||
} //Fin fixation box legs
|
translate([3*Thick +5,Thick,Height/2]) {
|
||||||
|
rotate([90,0,0]) {
|
||||||
|
$fn=6;
|
||||||
|
cylinder(d=16,Thick/2);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
translate([Length-((3*Thick)+5),Thick,Height/2]) {
|
||||||
|
rotate([90,0,0]) {
|
||||||
|
$fn=6;
|
||||||
|
cylinder(d=16,Thick/2);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
translate([4,Thick+Filet,Height/2-57]) {
|
||||||
|
rotate([45,0,0]) {
|
||||||
|
cube([Length,40,40]);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
translate([0,-(Thick*1.46),Height/2]) {
|
||||||
|
cube([Length,Thick*2,10]);
|
||||||
|
}
|
||||||
|
} //Fin fixation box legs
|
||||||
}
|
}
|
||||||
|
|
||||||
union(){// outbox sides decorations
|
union() {// outbox sides decorations
|
||||||
|
|
||||||
for(i=[0:Thick:Length/4]){
|
for(i=[0:Thick:Length/4]) {
|
||||||
|
|
||||||
// Ventilation holes part code submitted by Ettie - Thanks ;)
|
// Ventilation holes part code submitted by Ettie - Thanks ;)
|
||||||
translate([10+i,-Dec_Thick+Dec_size,1]){
|
translate([10+i,-Dec_Thick+Dec_size,1]) {
|
||||||
cube([Vent_width,Dec_Thick,Height/4]);
|
cube([Vent_width,Dec_Thick,Height/4]);
|
||||||
}
|
}
|
||||||
translate([(Length-10) - i,-Dec_Thick+Dec_size,1]){
|
translate([(Length-10) - i,-Dec_Thick+Dec_size,1]) {
|
||||||
cube([Vent_width,Dec_Thick,Height/4]);
|
cube([Vent_width,Dec_Thick,Height/4]);
|
||||||
}
|
}
|
||||||
translate([(Length-10) - i,Width-Dec_size,1]){
|
translate([(Length-10) - i,Width-Dec_size,1]) {
|
||||||
cube([Vent_width,Dec_Thick,Height/4]);
|
cube([Vent_width,Dec_Thick,Height/4]);
|
||||||
}
|
}
|
||||||
translate([10+i,Width-Dec_size,1]){
|
translate([10+i,Width-Dec_size,1]) {
|
||||||
cube([Vent_width,Dec_Thick,Height/4]);
|
cube([Vent_width,Dec_Thick,Height/4]);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
}// fin de for
|
}// fin de for
|
||||||
// }
|
}//fin union decoration
|
||||||
}//fin union decoration
|
}//fin difference decoration
|
||||||
}//fin difference decoration
|
|
||||||
|
|
||||||
|
union() { //sides holes
|
||||||
union(){ //sides holes
|
$fn=50;
|
||||||
$fn=50;
|
translate([3*Thick+5,20,Height/2+4]) {
|
||||||
translate([3*Thick+5,20,Height/2+4]){
|
rotate([90,0,0]) {
|
||||||
rotate([90,0,0]){
|
|
||||||
cylinder(d=2,20);
|
cylinder(d=2,20);
|
||||||
}
|
|
||||||
}
|
}
|
||||||
translate([Length-((3*Thick)+5),20,Height/2+4]){
|
}
|
||||||
rotate([90,0,0]){
|
translate([Length-((3*Thick)+5),20,Height/2+4]) {
|
||||||
|
rotate([90,0,0]) {
|
||||||
cylinder(d=2,20);
|
cylinder(d=2,20);
|
||||||
}
|
|
||||||
}
|
}
|
||||||
translate([3*Thick+5,Width+5,Height/2-4]){
|
}
|
||||||
rotate([90,0,0]){
|
translate([3*Thick+5,Width+5,Height/2-4]) {
|
||||||
|
rotate([90,0,0]) {
|
||||||
cylinder(d=2,20);
|
cylinder(d=2,20);
|
||||||
}
|
|
||||||
}
|
}
|
||||||
translate([Length-((3*Thick)+5),Width+5,Height/2-4]){
|
}
|
||||||
rotate([90,0,0]){
|
translate([Length-((3*Thick)+5),Width+5,Height/2-4]) {
|
||||||
|
rotate([90,0,0]) {
|
||||||
cylinder(d=2,20);
|
cylinder(d=2,20);
|
||||||
}
|
|
||||||
}
|
}
|
||||||
}//fin de sides holes
|
}
|
||||||
|
}//fin de sides holes
|
||||||
|
|
||||||
}//fin de difference holes
|
}//fin de difference holes
|
||||||
}// fin coque
|
}// fin coque
|
||||||
|
|
||||||
////////////////////////////// - Experiment - ///////////////////////////////////////////
|
////////////////////////////// - Experiment - ///////////////////////////////////////////
|
||||||
@ -235,52 +229,50 @@ module Coque(){//Coque - Shell
|
|||||||
|
|
||||||
|
|
||||||
/////////////////////// - Foot with base filet - /////////////////////////////
|
/////////////////////// - Foot with base filet - /////////////////////////////
|
||||||
module foot(FootDia,FootHole,FootHeight){
|
module foot(FootDia,FootHole,FootHeight) {
|
||||||
Filet=2;
|
Filet=2;
|
||||||
color(Couleur1)
|
color(Couleur1)
|
||||||
translate([0,0,Filet-1.5])
|
translate([0,0,Filet-1.5])
|
||||||
difference(){
|
difference() {
|
||||||
|
|
||||||
difference(){
|
difference() {
|
||||||
//translate ([0,0,-Thick]){
|
cylinder(d=FootDia+Filet,FootHeight-Thick, $fn=100);
|
||||||
cylinder(d=FootDia+Filet,FootHeight-Thick, $fn=100);
|
rotate_extrude($fn=100) {
|
||||||
//}
|
translate([(FootDia+Filet*2)/2,Filet,0]) {
|
||||||
rotate_extrude($fn=100){
|
minkowski() {
|
||||||
translate([(FootDia+Filet*2)/2,Filet,0]){
|
square(10);
|
||||||
minkowski(){
|
circle(Filet, $fn=100);
|
||||||
square(10);
|
}
|
||||||
circle(Filet, $fn=100);
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
cylinder(d=FootHole,FootHeight+1, $fn=100);
|
||||||
}
|
}
|
||||||
cylinder(d=FootHole,FootHeight+1, $fn=100);
|
|
||||||
}
|
|
||||||
}// Fin module foot
|
}// Fin module foot
|
||||||
|
|
||||||
module Feet(){
|
module Feet() {
|
||||||
//////////////////// - PCB only visible in the preview mode - /////////////////////
|
//////////////////// - PCB only visible in the preview mode - /////////////////////
|
||||||
translate([3*Thick+2,Thick+5,FootHeight+(Thick/2)-0.5]){
|
translate([3*Thick+2,Thick+5,FootHeight+(Thick/2)-0.5]) {
|
||||||
|
|
||||||
%square ([PCBLength+10,PCBWidth+10]);
|
%square ([PCBLength+10,PCBWidth+10]);
|
||||||
translate([PCBLength/2,PCBWidth/2,0.5]){
|
translate([PCBLength/2,PCBWidth/2,0.5]) {
|
||||||
color("Olive")
|
color("Olive")
|
||||||
%text("PCB", halign="center", valign="center", font="Arial black");
|
%text("PCB", halign="center", valign="center", font="Arial black");
|
||||||
}
|
}
|
||||||
} // Fin PCB
|
} // Fin PCB
|
||||||
|
|
||||||
|
|
||||||
////////////////////////////// - 4 Feet - //////////////////////////////////////////
|
////////////////////////////// - 4 Feet - //////////////////////////////////////////
|
||||||
translate([3*Thick+7,Thick+10,Thick/2]){
|
translate([3*Thick+7,Thick+10,Thick/2]) {
|
||||||
foot(FootDia,FootHole,FootHeight);
|
foot(FootDia,FootHole,FootHeight);
|
||||||
}
|
}
|
||||||
translate([(3*Thick)+PCBLength+7,Thick+10,Thick/2]){
|
translate([(3*Thick)+PCBLength+7,Thick+10,Thick/2]) {
|
||||||
foot(FootDia,FootHole,FootHeight);
|
foot(FootDia,FootHole,FootHeight);
|
||||||
}
|
}
|
||||||
translate([(3*Thick)+PCBLength+7,(Thick)+PCBWidth+10,Thick/2]){
|
translate([(3*Thick)+PCBLength+7,(Thick)+PCBWidth+10,Thick/2]) {
|
||||||
foot(FootDia,FootHole,FootHeight);
|
foot(FootDia,FootHole,FootHeight);
|
||||||
}
|
}
|
||||||
translate([3*Thick+7,(Thick)+PCBWidth+10,Thick/2]){
|
translate([3*Thick+7,(Thick)+PCBWidth+10,Thick/2]) {
|
||||||
foot(FootDia,FootHole,FootHeight);
|
foot(FootDia,FootHole,FootHeight);
|
||||||
}
|
}
|
||||||
|
|
||||||
@ -294,96 +286,95 @@ module Feet(){
|
|||||||
////////////////////////////////////////////////////////////////////////
|
////////////////////////////////////////////////////////////////////////
|
||||||
|
|
||||||
// <- Panel ->
|
// <- Panel ->
|
||||||
module Panel(Length,Width,Thick,Filet){
|
module Panel(Length,Width,Thick,Filet) {
|
||||||
scale([0.5,1,1])
|
scale([0.5,1,1])
|
||||||
minkowski(){
|
minkowski() {
|
||||||
cube([Thick,Width-(Thick*2+Filet*2+m),Height-(Thick*2+Filet*2+m)]);
|
cube([Thick,Width-(Thick*2+Filet*2+m),Height-(Thick*2+Filet*2+m)]);
|
||||||
translate([0,Filet,Filet])
|
translate([0,Filet,Filet])
|
||||||
rotate([0,90,0])
|
rotate([0,90,0])
|
||||||
cylinder(r=Filet,h=Thick, $fn=100);
|
cylinder(r=Filet,h=Thick, $fn=100);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
// <- Circle hole ->
|
// <- Circle hole ->
|
||||||
// Cx=Cylinder X position | Cy=Cylinder Y position | Cdia= Cylinder dia | Cheight=Cyl height
|
// Cx=Cylinder X position | Cy=Cylinder Y position | Cdia= Cylinder dia | Cheight=Cyl height
|
||||||
module CylinderHole(OnOff,Cx,Cy,Cdia){
|
module CylinderHole(OnOff,Cx,Cy,Cdia) {
|
||||||
if(OnOff==1)
|
if(OnOff==1)
|
||||||
translate([Cx,Cy,-1])
|
translate([Cx,Cy,-1])
|
||||||
cylinder(d=Cdia,10, $fn=50);
|
cylinder(d=Cdia,10, $fn=50);
|
||||||
}
|
}
|
||||||
// <- Square hole ->
|
// <- Square hole ->
|
||||||
// Sx=Square X position | Sy=Square Y position | Sl= Square Length | Sw=Square Width | Filet = Round corner
|
// Sx=Square X position | Sy=Square Y position | Sl= Square Length | Sw=Square Width | Filet = Round corner
|
||||||
module SquareHole(OnOff,Sx,Sy,Sl,Sw,Filet){
|
module SquareHole(OnOff,Sx,Sy,Sl,Sw,Filet) {
|
||||||
if(OnOff==1)
|
if(OnOff==1)
|
||||||
minkowski(){
|
minkowski() {
|
||||||
translate([Sx+Filet/2,Sy+Filet/2,-1])
|
translate([Sx+Filet/2,Sy+Filet/2,-1])
|
||||||
cube([Sl-Filet,Sw-Filet,10]);
|
cube([Sl-Filet,Sw-Filet,10]);
|
||||||
cylinder(d=Filet,h=10, $fn=100);
|
cylinder(d=Filet,h=10, $fn=100);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
// <- Linear text panel ->
|
// <- Linear text panel ->
|
||||||
module LText(OnOff,Tx,Ty,Font,Size,Content){
|
module LText(OnOff,Tx,Ty,Font,Size,Content) {
|
||||||
if(OnOff==1)
|
if(OnOff==1)
|
||||||
translate([Tx,Ty,Thick+.5])
|
translate([Tx,Ty,Thick+.5])
|
||||||
linear_extrude(height = 0.5){
|
linear_extrude(height = 0.5) {
|
||||||
text(Content, size=Size, font=Font);
|
text(Content, size=Size, font=Font);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
// <- Circular text panel->
|
// <- Circular text panel->
|
||||||
module CText(OnOff,Tx,Ty,Font,Size,TxtRadius,Angl,Turn,Content){
|
module CText(OnOff,Tx,Ty,Font,Size,TxtRadius,Angl,Turn,Content) {
|
||||||
if(OnOff==1) {
|
if(OnOff==1) {
|
||||||
Angle = -Angl / len(Content);
|
Angle = -Angl / len(Content);
|
||||||
translate([Tx,Ty,Thick+.5])
|
translate([Tx,Ty,Thick+.5])
|
||||||
for (i= [0:len(Content)-1] ){
|
for (i= [0:len(Content)-1] ) {
|
||||||
rotate([0,0,i*Angle+90+Turn])
|
rotate([0,0,i*Angle+90+Turn])
|
||||||
translate([0,TxtRadius,0]) {
|
translate([0,TxtRadius,0]) {
|
||||||
linear_extrude(height = 0.5){
|
linear_extrude(height = 0.5) {
|
||||||
text(Content[i], font = Font, size = Size, valign ="baseline", halign ="center");
|
text(Content[i], font = Font, size = Size, valign ="baseline", halign ="center");
|
||||||
}
|
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
}
|
||||||
}
|
}
|
||||||
////////////////////// <- New module Panel -> //////////////////////
|
////////////////////// <- New module Panel -> //////////////////////
|
||||||
module FPanL(){
|
module FPanL() {
|
||||||
difference(){
|
difference() {
|
||||||
color(Couleur2)
|
color(Couleur2)
|
||||||
Panel(Length,Width,Thick,Filet);
|
Panel(Length,Width,Thick,Filet);
|
||||||
|
|
||||||
|
rotate([90,0,90]) {
|
||||||
rotate([90,0,90]){
|
color(Couleur2) {
|
||||||
color(Couleur2){
|
|
||||||
// <- Cutting shapes from here ->
|
// <- Cutting shapes from here ->
|
||||||
SquareHole (1,20,20,15,10,1); //(On/Off, Xpos,Ypos,Length,Width,Filet)
|
SquareHole (1,20,20,15,10,1); //(On/Off, Xpos,Ypos,Length,Width,Filet)
|
||||||
SquareHole (1,40,20,15,10,1);
|
SquareHole (1,40,20,15,10,1);
|
||||||
SquareHole (1,60,20,15,10,1);
|
SquareHole (1,60,20,15,10,1);
|
||||||
CylinderHole(1,27,40,8); //(On/Off, Xpos, Ypos, Diameter)
|
CylinderHole(1,27,40,8); //(On/Off, Xpos, Ypos, Diameter)
|
||||||
CylinderHole(1,47,40,8);
|
CylinderHole(1,47,40,8);
|
||||||
CylinderHole(1,67,40,8);
|
CylinderHole(1,67,40,8);
|
||||||
SquareHole (1,20,50,80,30,3);
|
SquareHole (1,20,50,80,30,3);
|
||||||
CylinderHole(1,93,30,10);
|
CylinderHole(1,93,30,10);
|
||||||
SquareHole (1,120,20,30,60,3);
|
SquareHole (1,120,20,30,60,3);
|
||||||
// <- To here ->
|
// <- To here ->
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
color(Couleur1){
|
color(Couleur1) {
|
||||||
translate ([-.5,0,0])
|
translate ([-.5,0,0])
|
||||||
rotate([90,0,90]){
|
rotate([90,0,90]) {
|
||||||
// <- Adding text from here ->
|
// <- Adding text from here ->
|
||||||
LText(1,20,83,"Arial Black",4,"Digital Screen");//(On/Off, Xpos, Ypos, "Font", Size, "Text")
|
LText(1,20,83,"Arial Black",4,"Digital Screen");//(On/Off, Xpos, Ypos, "Font", Size, "Text")
|
||||||
LText(1,120,83,"Arial Black",4,"Level");
|
LText(1,120,83,"Arial Black",4,"Level");
|
||||||
LText(1,20,11,"Arial Black",6," 1 2 3");
|
LText(1,20,11,"Arial Black",6," 1 2 3");
|
||||||
CText(1,93,29,"Arial Black",4,10,180,0,"1 . 2 . 3 . 4 . 5 . 6");//(On/Off, Xpos, Ypos, "Font", Size, Diameter, Arc(Deg), Starting Angle(Deg),"Text")
|
CText(1,93,29,"Arial Black",4,10,180,0,"1 . 2 . 3 . 4 . 5 . 6");//(On/Off, Xpos, Ypos, "Font", Size, Diameter, Arc(Deg), Starting Angle(Deg),"Text")
|
||||||
// <- To here ->
|
// <- To here ->
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
@ -391,35 +382,35 @@ module FPanL(){
|
|||||||
|
|
||||||
if(TShell==1)
|
if(TShell==1)
|
||||||
// Coque haut - Top Shell
|
// Coque haut - Top Shell
|
||||||
color( Couleur1,1){
|
color( Couleur1,1) {
|
||||||
translate([0,Width,Height+0.2]){
|
translate([0,Width,Height+0.2]) {
|
||||||
rotate([0,180,180]){
|
rotate([0,180,180]) {
|
||||||
Coque();
|
Coque();
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
if(BShell==1)
|
if(BShell==1)
|
||||||
// Coque bas - Bottom shell
|
// Coque bas - Bottom shell
|
||||||
color(Couleur1){
|
color(Couleur1) {
|
||||||
Coque();
|
Coque();
|
||||||
}
|
}
|
||||||
|
|
||||||
// Pied support PCB - PCB feet
|
// Pied support PCB - PCB feet
|
||||||
if (PCBFeet==1)
|
if (PCBFeet==1)
|
||||||
// Feet
|
// Feet
|
||||||
translate([PCBPosX,PCBPosY,0]){
|
translate([PCBPosX,PCBPosY,0]) {
|
||||||
Feet();
|
Feet();
|
||||||
}
|
}
|
||||||
|
|
||||||
// Panneau avant - Front panel <<<<<< Text and holes only on this one.
|
// Panneau avant - Front panel <<<<<< Text and holes only on this one.
|
||||||
//rotate([0,-90,-90])
|
//rotate([0,-90,-90])
|
||||||
if(FPanL==1)
|
if(FPanL==1)
|
||||||
translate([Length-(Thick*2+m/2),Thick+m/2,Thick+m/2])
|
translate([Length-(Thick*2+m/2),Thick+m/2,Thick+m/2])
|
||||||
FPanL();
|
FPanL();
|
||||||
|
|
||||||
//Panneau arrière - Back panel
|
//Panneau arrière - Back panel
|
||||||
if(BPanL==1)
|
if(BPanL==1)
|
||||||
color(Couleur2)
|
color(Couleur2)
|
||||||
translate([Thick+m/2,Thick+m/2,Thick+m/2])
|
translate([Thick+m/2,Thick+m/2,Thick+m/2])
|
||||||
Panel(Length,Width,Thick,Filet);
|
Panel(Length,Width,Thick,Filet);
|
||||||
|
Loading…
Reference in New Issue
Block a user