Merge branch 'master' into top_hole
This commit is contained in:
Joel Ebel
commit
2250e70c25
@ -65,9 +65,10 @@ Decorations = 1; // [0:No, 1:Yes]
|
||||
Vent = 1; // [0:No, 1:Yes]
|
||||
// - Decoration-Holes width (in mm)
|
||||
Vent_width = 1.5;
|
||||
// - Tolerance (Panel/rails gap)
|
||||
PanelThickGap = CutoutMargin*2 + PartMargin*2;
|
||||
PanelEdgeGap = PartMargin*2;
|
||||
// - Tolerance (Panel/rails gap on one edge)
|
||||
PanelThickGap = CutoutMargin + PartMargin;
|
||||
PanelVerticalGap = PartMargin;
|
||||
PanelHorizontalGap = CutoutMargin + PartMargin;
|
||||
|
||||
|
||||
/* [Box Fixation Tabs] */
|
||||
@ -172,7 +173,7 @@ Dec_Thick = Vent ? Thick*1.001 + Filet : Thick/2;
|
||||
// Separate vents with a square pillar by default.
|
||||
Dec_Spacing = Thick + Vent_width;
|
||||
// X offset to center of first vent
|
||||
Dec_Offset = Thick*2 + PanelThick + PanelThickGap + Dec_Spacing - Vent_width/2;
|
||||
Dec_Offset = Thick*2 + PanelThick + PanelThickGap*2 + Dec_Spacing - Vent_width/2;
|
||||
|
||||
// Resolution based on Round parameter. Set this first number to something
|
||||
// smaller to speed up processing. It should always be a multiple of 4.
|
||||
@ -185,16 +186,16 @@ Resolution = Round ? 100: 4;
|
||||
design, you will need to set the TopMargin to
|
||||
(Height - Thick*2 - FootHeight - PCBThick)
|
||||
*/
|
||||
Length = PCBLength + FrontEdgeMargin + BackEdgeMargin + ((Thick + PanelThick + PanelThickGap)*2);
|
||||
Length = PCBLength + FrontEdgeMargin + BackEdgeMargin + ((Thick + PanelThick + PanelThickGap*2)*2);
|
||||
Width = PCBWidth + LeftEdgeMargin + RightEdgeMargin + Thick*2;
|
||||
Height = FootHeight + PCBThick + TopMargin + Thick*2;
|
||||
echo("Box: ", Length=Length, Width=Width, Height=Height);
|
||||
// X position inset of mounting holes and tabs
|
||||
MountInset = Thick*3 + PanelThick + PanelThickGap + ScrewHole*4;
|
||||
MountInset = Thick*3 + PanelThick + PanelThickGap*2 + ScrewHole*4;
|
||||
|
||||
// Calculate panel dimensions from box dimensions.
|
||||
PanelWidth = Width - Thick*2 - PanelEdgeGap;
|
||||
PanelHeight = Height - Thick*2 - PanelEdgeGap;
|
||||
PanelWidth = Width - Thick*2 - PanelHorizontalGap*2;
|
||||
PanelHeight = Height - Thick*2 - PanelVerticalGap*2;
|
||||
|
||||
|
||||
/* Panel Manager
|
||||
@ -209,14 +210,14 @@ PanelHeight = Height - Thick*2 - PanelEdgeGap;
|
||||
|
||||
// Calculate board-relative positions with respect to the panel, for
|
||||
// convenience in placing panel elements.
|
||||
TopOfBoardWRTPanel = FootHeight + PCBThick - (PanelEdgeGap/2);
|
||||
LeftEdgeOfBoardWRTFPanel = LeftEdgeMargin - (PanelEdgeGap/2);
|
||||
LeftEdgeOfBoardWRTBPanel = RightEdgeMargin - (PanelEdgeGap/2);
|
||||
TopOfBoardWRTPanel = FootHeight + PCBThick - PanelVerticalGap;
|
||||
LeftEdgeOfBoardWRTFPanel = LeftEdgeMargin - PanelHorizontalGap;
|
||||
LeftEdgeOfBoardWRTBPanel = RightEdgeMargin - PanelHorizontalGap;
|
||||
// Visible panel edges
|
||||
PanelBottomEdge = Thick - (PanelEdgeGap/2);
|
||||
PanelTopEdge = PanelHeight - Thick + (PanelEdgeGap/2);
|
||||
PanelLeftEdge = Thick - (PanelEdgeGap/2);
|
||||
PanelRightEdge = PanelWidth - Thick + (PanelEdgeGap/2);
|
||||
PanelBottomEdge = Thick - PanelVerticalGap;
|
||||
PanelTopEdge = PanelHeight - Thick + PanelVerticalGap;
|
||||
PanelLeftEdge = Thick - PanelHorizontalGap;
|
||||
PanelRightEdge = PanelWidth - Thick + PanelHorizontalGap;
|
||||
|
||||
|
||||
// Holes for front panel
|
||||
@ -325,8 +326,8 @@ module MainBox() {
|
||||
}
|
||||
// Makes interior backing for panel as a wall
|
||||
difference() {
|
||||
RoundBox(xshrink=(Thick + PanelThick + PanelThickGap), yzshrink=Thick/2);
|
||||
RoundBox(xshrink=(Thick*2 + PanelThick + PanelThickGap));
|
||||
RoundBox(xshrink=(Thick + PanelThick + PanelThickGap*2), yzshrink=Thick/2);
|
||||
RoundBox(xshrink=(Thick*2 + PanelThick + PanelThickGap*2));
|
||||
}
|
||||
}
|
||||
// Remove the top half
|
||||
@ -564,7 +565,7 @@ module PCB() {
|
||||
|
||||
Produces a single foot for PCB mounting.
|
||||
*/
|
||||
module foot() {
|
||||
module foot(top=0) {
|
||||
color(Couleur1) {
|
||||
rotate_extrude($fn=100) {
|
||||
difference() {
|
||||
@ -588,12 +589,24 @@ module foot() {
|
||||
}
|
||||
if (Screwless && !top) { // Remove around peg
|
||||
translate([FootHole/2 - PartMargin, FootHeight]) {
|
||||
square([FootDia/2, PCBThick*3]);
|
||||
polygon([[0, 0],
|
||||
[FootDia/2, 0],
|
||||
[FootDia/2, PCBThick*3],
|
||||
[-FootHole/3, PCBThick*3],
|
||||
[0, PCBThick]
|
||||
]
|
||||
);
|
||||
}
|
||||
}
|
||||
if (Screwless && top) { // Remove hole for peg
|
||||
translate([-FootHole/2, TopMargin - PCBThick, 0]) {
|
||||
square([(FootHole + CutoutMargin), PCBThick*2]);
|
||||
polygon([[0, 0],
|
||||
[(FootHole*5/6 + CutoutMargin), 0],
|
||||
[(FootHole + CutoutMargin), PCBThick],
|
||||
[(FootHole + CutoutMargin), PCBThick*2],
|
||||
[0, PCBThick*2],
|
||||
]
|
||||
);
|
||||
}
|
||||
}
|
||||
|
||||
@ -612,7 +625,7 @@ module foot() {
|
||||
No arguments are used, but parameters provide the PCB and foot dimensions.
|
||||
*/
|
||||
module Feet(top=0) {
|
||||
translate([BackEdgeMargin + Thick + PanelThick + PanelThickGap, LeftEdgeMargin + Thick, Thick]) {
|
||||
translate([BackEdgeMargin + Thick + PanelThick + PanelThickGap*2, LeftEdgeMargin + Thick, Thick]) {
|
||||
if (!top) {
|
||||
%PCB();
|
||||
}
|
||||
@ -675,7 +688,7 @@ module BottomShell() {
|
||||
Coque();
|
||||
Tabs();
|
||||
if (PCBFeet) {
|
||||
Feet();
|
||||
Feet(top=0);
|
||||
}
|
||||
}
|
||||
Holes();
|
||||
@ -689,7 +702,7 @@ module BottomShell() {
|
||||
arguments but uses the global parameters.
|
||||
*/
|
||||
module Panel() {
|
||||
Filet = (Filet > Thick*2) ? Filet - Thick - PanelEdgeGap/2 : Filet - PanelEdgeGap/2;
|
||||
Filet = (Filet > Thick*2) ? Filet - Thick - PanelVerticalGap : Filet - PanelVerticalGap;
|
||||
echo("Panel:", Thick=PanelThick, PanelWidth=PanelWidth, PanelHeight=PanelHeight, Filet=Filet);
|
||||
translate([Filet, Filet, 0]) {
|
||||
offset(r=Filet, $fn=Resolution) {
|
||||
@ -734,11 +747,12 @@ module CylinderHole(OnOff, Cx, Cy, Cdia) {
|
||||
*/
|
||||
module SquareHole(OnOff, Sx, Sy, Sl, Sw, Filet) {
|
||||
if (OnOff) {
|
||||
Offset = Filet + CutoutMargin;
|
||||
echo("SquareHole:", Sx=Sx - CutoutMargin, Sy=Sy - CutoutMargin,
|
||||
Sl=Sl + CutoutMargin*2, Sw=Sw + CutoutMargin*2, Filet=Filet);
|
||||
translate([Sx + Filet - CutoutMargin, Sy + Filet - CutoutMargin, 0]) {
|
||||
offset(r=Filet, $fn=Resolution) {
|
||||
square([Sl + CutoutMargin*2 - Filet*2, Sw + CutoutMargin*2 - Filet*2]);
|
||||
Sl=Sl + CutoutMargin*2, Sw=Sw + CutoutMargin*2, Filet=Offset);
|
||||
translate([Sx + Filet, Sy + Filet, 0]) {
|
||||
offset(r=Offset, $fn=Resolution) {
|
||||
square([Sl - Filet*2, Sw - Filet*2]);
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -814,9 +828,9 @@ module CText(OnOff, Tx, Ty, Font, Size, TxtRadius, Angl, Turn, Content) {
|
||||
text for your box.
|
||||
*/
|
||||
module FPanL() {
|
||||
translate([Length - (Thick + PanelThickGap/2 + PanelThick),
|
||||
Thick + PanelEdgeGap/2,
|
||||
Thick + PanelEdgeGap/2]) {
|
||||
translate([Length - (Thick + PanelThickGap + PanelThick),
|
||||
Thick + PanelHorizontalGap,
|
||||
Thick + PanelVerticalGap]) {
|
||||
rotate([90, 0, 90]) {
|
||||
color(Couleur2) {
|
||||
linear_extrude(height=PanelThick) {
|
||||
@ -845,9 +859,9 @@ module FPanL() {
|
||||
text for your box.
|
||||
*/
|
||||
module BPanL() {
|
||||
translate([Thick + PanelThickGap/2 + PanelThick,
|
||||
Thick + PanelEdgeGap/2 + PanelWidth,
|
||||
Thick + PanelEdgeGap/2]) {
|
||||
translate([Thick + PanelThickGap + PanelThick,
|
||||
Thick + PanelHorizontalGap + PanelWidth,
|
||||
Thick + PanelVerticalGap]) {
|
||||
rotate([90, 0, 270]) {
|
||||
color(Couleur2) {
|
||||
linear_extrude(height=PanelThick) {
|
||||
|
||||
Loading…
Reference in New Issue
Block a user