Updated docs
This commit is contained in:
Magnus Persson
parent
700f00f48d
commit
fbc1eb4e31
@ -128,18 +128,18 @@ Retrive the data used for formula calculation data via an HTTP GET command. Payl
|
||||
POST: /api/config/device
|
||||
========================
|
||||
|
||||
Used to update device settings via an HTTP POST command. Payload is in JSON format.
|
||||
Used to update device settings via an HTTP POST command.
|
||||
|
||||
Payload should be in standard format used for posting a form. Such as as: `id=value&mdns=value` etc. Key value pairs are shown below.
|
||||
|
||||
* ``temp-format`` can be either ``C`` (Celcius) or ``F`` (Farenheight)
|
||||
|
||||
.. code-block:: json
|
||||
.. code-block::
|
||||
|
||||
{
|
||||
"id": "ee1bfc",
|
||||
"mdns": "gravmon",
|
||||
"temp-format": "C",
|
||||
"sleep-interval": 30
|
||||
}
|
||||
id=ee1bfc
|
||||
mdns=gravmon
|
||||
temp-format=C
|
||||
sleep-interval=30
|
||||
|
||||
|
||||
POST: /api/config/push
|
||||
@ -147,26 +147,26 @@ POST: /api/config/push
|
||||
|
||||
Used to update push settings via an HTTP POST command. Payload is in JSON format.
|
||||
|
||||
.. code-block:: json
|
||||
Payload should be in standard format used for posting a form. Such as as: `id=value&mdns=value` etc. Key value pairs are shown below.
|
||||
|
||||
{
|
||||
"id": "ee1bfc",
|
||||
"http-push": "http://192.168.1.50/ispindel",
|
||||
"http-push2": "",
|
||||
"http-push-h1": "",
|
||||
"http-push-h2": "",
|
||||
"http-push2-h1": "",
|
||||
"http-push2-h2": "",
|
||||
"brewfather-push": "",
|
||||
"influxdb2-push": "http://192.168.1.50:8086",
|
||||
"influxdb2-org": "Qwerty",
|
||||
"influxdb2-bucket": "Qwerty",
|
||||
"influxdb2-auth": "Qwerty"
|
||||
"mqtt-push": "192.168.1.50",
|
||||
"mqtt-port": 1883,
|
||||
"mqtt-user": "Qwerty",
|
||||
"mqtt-pass": "Qwerty",
|
||||
}
|
||||
.. code-block::
|
||||
|
||||
id=ee1bfc
|
||||
http-push=http://192.168.1.50/ispindel
|
||||
http-push2=
|
||||
http-push-h1=
|
||||
http-push-h2=
|
||||
http-push2-h1=
|
||||
http-push2-h2=
|
||||
brewfather-push=
|
||||
influxdb2-push=http://192.168.1.50:8086
|
||||
influxdb2-org=
|
||||
influxdb2-bucket=
|
||||
influxdb2-auth=
|
||||
mqtt-push=192.168.1.50
|
||||
mqtt-port=1883
|
||||
mqtt-user=
|
||||
mqtt-pass=
|
||||
|
||||
|
||||
POST: /api/config/gravity
|
||||
@ -181,14 +181,14 @@ Used to update gravity settings via an HTTP POST command. Payload is in JSON for
|
||||
``gravity-temp-adjustment`` is defined as "on" or "off" when posting since this is the output values
|
||||
from a checkbox, when reading data it's sent as boolean (true,false).
|
||||
|
||||
.. code-block:: json
|
||||
Payload should be in standard format used for posting a form. Such as as: `id=value&mdns=value` etc. Key value pairs are shown below.
|
||||
|
||||
{
|
||||
"id": "ee1bfc",
|
||||
"gravity-formula": "0.0*tilt^3+0.0*tilt^2+0.0017978*tilt+0.9436",
|
||||
"gravity-format": "P",
|
||||
"gravity-temp-adjustment": "off"
|
||||
}
|
||||
.. code-block::
|
||||
|
||||
id=ee1bfc
|
||||
gravity-formula=0.0*tilt^3+0.0*tilt^2+0.0017978*tilt+0.9436,
|
||||
gravity-format=P
|
||||
gravity-temp-adjustment=off
|
||||
|
||||
|
||||
POST: /api/config/hardware
|
||||
@ -200,15 +200,15 @@ Used to update hardware settings via an HTTP POST command. Payload is in JSON fo
|
||||
``gyro-temp`` is defined as "on" or "off" when posting since this is the output values from a checkbox, when
|
||||
reading data it's sent as boolean (true,false).
|
||||
|
||||
.. code-block:: json
|
||||
Payload should be in standard format used for posting a form. Such as as: `id=value&mdns=value` etc. Key value pairs are shown below.
|
||||
|
||||
{
|
||||
"id": "ee1bfc",
|
||||
"voltage-factor": 1.59,
|
||||
"temp-adjustment": 0,
|
||||
"gyro-temp": "off",
|
||||
"ota-url": "http://192.168.1.50/firmware/gravmon/"
|
||||
}
|
||||
.. code-block::
|
||||
|
||||
id=ee1bfc
|
||||
voltage-factor=1.59
|
||||
temp-adjustment=0
|
||||
gyro-temp=off
|
||||
ota-url=http://192.168.1.50/firmware/gravmon/
|
||||
|
||||
|
||||
POST: /api/config/formula
|
||||
@ -219,21 +219,21 @@ Used to update formula calculation data via an HTTP POST command. Payload is in
|
||||
* ``a1``-``a4`` are the angles/tilt readings (up to 5 are currently supported)
|
||||
* ``g1``-``g4`` are the corresponding gravity reaadings (in SG)
|
||||
|
||||
.. code-block:: json
|
||||
Payload should be in standard format used for posting a form. Such as as: `id=value&mdns=value` etc. Key value pairs are shown below.
|
||||
|
||||
{
|
||||
"id": "ee1bfc",
|
||||
"a1": 22.4,
|
||||
"a2": 54.4,
|
||||
"a3": 58,
|
||||
"a4": 0,
|
||||
"a5": 0,
|
||||
"g1": 1.000,
|
||||
"g2": 1.053,
|
||||
"g3": 1.062,
|
||||
"g4": 1,
|
||||
"g5": 1
|
||||
}
|
||||
.. code-block::
|
||||
|
||||
id=ee1bfc
|
||||
a1=22.4
|
||||
a2=54.4
|
||||
a3=58
|
||||
a4=0
|
||||
a5=0
|
||||
g1=1.000
|
||||
g2=1.053
|
||||
g3=1.062
|
||||
g4=1
|
||||
g5=1
|
||||
|
||||
|
||||
Calling the API's from Python
|
||||
@ -242,6 +242,8 @@ Calling the API's from Python
|
||||
Here is some example code for how to access the API's from a python script. Keys should always be
|
||||
present or the API call will fail.
|
||||
|
||||
The requests package converts the json to standard form post format.
|
||||
|
||||
.. code-block:: python
|
||||
|
||||
import requests
|
||||
|
||||
@ -6,14 +6,17 @@ Releases
|
||||
v0.8.0
|
||||
------
|
||||
|
||||
* Added option to set http headers (2 per endpoint)
|
||||
* Added option to set http headers (2 per http endpoint)
|
||||
* Added possibility to view last 10 errors on device page.
|
||||
* Added instructions for how to configure integration with Fermentrack
|
||||
* Added instructions for how to configure integration with Ubidots
|
||||
* Added instructions for how to configure integration with HomeAssistant
|
||||
|
||||
v0.7.1
|
||||
------
|
||||
|
||||
* Defined mqtt port was ignored, used default values.
|
||||
* Extended length of HTTP url fields from 100 to 120 chars.
|
||||
* Extended length of HTTP url fields from 100 to 120 chars.
|
||||
|
||||
v0.7.0
|
||||
------
|
||||
|
||||
@ -28,6 +28,7 @@ GravityMon can be installed and used as an iSpindle. Just register the device as
|
||||
|
||||
http://myservername/ispindel
|
||||
|
||||
|
||||
UBIdots
|
||||
+++++++
|
||||
|
||||
@ -79,3 +80,40 @@ format template that can be used. For information on customizing the format see
|
||||
"rssi": ${rssi}
|
||||
}
|
||||
|
||||
|
||||
Home Assistant
|
||||
+++++++++++++++
|
||||
|
||||
`HomeAssistant <https://www.homeassistant.com>`_ is a platform for home automation and can collect sensor data
|
||||
from multiple devices.
|
||||
|
||||
This setup uses the MQTT integration with home assistant to collect values from the device.
|
||||
|
||||
This part of the configuration goes into the home assistant configuration.yaml file. The example assumes that the
|
||||
device is named `gravmon2`
|
||||
|
||||
::
|
||||
|
||||
sensor:
|
||||
- platform: mqtt
|
||||
name: "gravmon2_gravity"
|
||||
state_topic: "gravmon/gravmon2/gravity"
|
||||
- platform: mqtt
|
||||
name: "gravmon2_battery"
|
||||
state_topic: "gravmon/gravmon2/battery"
|
||||
- platform: mqtt
|
||||
name: "gravmon2_rssi"
|
||||
state_topic: "gravmon/gravmon2/rssi"
|
||||
|
||||
|
||||
Enter the name of the MQTT server in Home Assistant in the URL. You might need to install that option
|
||||
first. This is the format needed to submit the data to the correct topics as needed above. You can add as
|
||||
many sensors / topics as you want.
|
||||
|
||||
::
|
||||
|
||||
gravmon/${mdns}/tilt:${angle}|
|
||||
gravmon/${mdns}/temperature:${temp}|
|
||||
gravmon/${mdns}/temp_units:${temp-unit}|
|
||||
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user