Merge branch 'dev' of https://github.com/mp-se/gravitymon into dev

Precommit format
GitHub Action Build
2022-07-06 09:44:11 +02:00 · 2022-07-06 09:43:48 +02:00 · 2022-07-06 07:14:25 +00:00 · 2022-07-06 09:10:23 +02:00 · 2022-07-06 09:10:10 +02:00 · 2022-07-06 09:09:18 +02:00
48 changed files with 5986 additions and 216 deletions
--- a/.github/stale.yaml
+++ b/.github/stale.yaml
@ -0,0 +1,17 @@
+# Number of days of inactivity before an issue becomes stale
+daysUntilStale: 60
+# Number of days of inactivity before a stale issue is closed
+daysUntilClose: 14
+# Issues with these labels will never be considered stale
+exemptLabels:
+  - on-hold
+  - security
+# Label to use when marking an issue as stale
+staleLabel: wontfix
+# Comment to post when marking an issue as stale. Set to `false` to disable
+markComment: >
+  This issue has been automatically marked as stale because it has not had
+  recent activity. It will be closed if no further activity occurs. Thank you
+  for your contributions.
+# Comment to post when closing a stale issue. Set to `false` to disable
+closeComment: false
--- a/.github/workflows/doc-build.yaml
+++ b/.github/workflows/doc-build.yaml
@ -16,8 +16,12 @@ jobs:
        with:
          docs-folder: "src_docs/"
          pre-build-command: |
-            pip install sphinx_rtd_theme
-            pip install furo
+            pip install --upgrade pip
+            pip install sphinx==4.3.2
+            pip install docutils==0.16
+            pip install pygments==2.11.1
+            pip install furo==2022.1.2
+            pip list
          build-command: "sphinx-build -b html ./source ../docs"

      - name: Commit documentation changes
--- a/.github/workflows/pre-commit.yaml
+++ b/.github/workflows/pre-commit.yaml
@ -0,0 +1,19 @@
+name: pre-commit
+
+on:
+  pull_request:
+  push:
+    branches: 
+      - master
+      - dev
+
+jobs:
+  pre-commit:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v2
+    - uses: actions/setup-python@v2 
+    - name: clang format support
+      run: |
+        sudo apt install clang-format cppcheck
+    - uses: pre-commit/action@v2.0.3
--- a/.pre-commit-config.yaml
+++ b/.pre-commit-config.yaml
@ -4,7 +4,10 @@ repos:
    hooks:
    -   id: clang-format
        files: ^src/
+        exclude: 'lib/'
    -   id: cpplint
        files: ^src/
+        exclude: 'lib/'
    -   id: cppcheck
        files: ^src/
+        exclude: 'lib/'
--- a/bin/config.min.htm
+++ b/bin/config.min.htm
--- a/bin/firmware-perf.bin
+++ b/bin/firmware-perf.bin
--- a/bin/firmware.bin
+++ b/bin/firmware.bin
--- a/bin/firmware32-perf.bin
+++ b/bin/firmware32-perf.bin
--- a/bin/firmware32.bin
+++ b/bin/firmware32.bin
--- a/bin/format.min.htm
+++ b/bin/format.min.htm
--- a/bin/version.json
+++ b/bin/version.json
@ -1 +1 @@
-{ "project":"gravmon", "version":"1.0.0",  "html": [ ] }
+{ "project":"gravmon", "version":"1.1.0",  "html": [ ] }
--- a/html/config.htm
+++ b/html/config.htm
@ -390,11 +390,18 @@
            <div class="row mb-3">
              <label for="voltage-factor" class="col-sm-2 col-form-label">Voltage factor</label>
              <div class="col-sm-2">
-                <input type="number" step=".01" class="form-control" name="voltage-factor" id="voltage-factor" placeholder="1.59" data-bs-toggle="tooltip" title="Factor used to calculate the battery voltage. When running on battery, the voltage should be less than 4.15V">
+                <input type="number" step=".01" class="form-control" name="voltage-factor" id="voltage-factor" placeholder="1.59" data-bs-toggle="tooltip" title="Factor used to calculate the battery voltage. Can vary depending on the R2 value">
              </div>
              <label for="voltage-factor" class="col-sm-3 col-form-label" id="battery">Loading...</label>
            </div>

+            <div class="row mb-3">
+              <label for="voltage-config" class="col-sm-2 col-form-label">Config voltage</label>
+              <div class="col-sm-2">
+                <input type="number" step=".01" min="3.00" max="6.00" class="form-control" name="voltage-config" id="voltage-config" placeholder="4.16" data-bs-toggle="tooltip" title="Over this level the device will always go into configuration mode, some batteries might have a higher voltage when fully charged">
+              </div>
+            </div>
+
            <div class="row mb-3">
              <label for="temp-adjustment-value" class="col-sm-2 col-form-label">Temp Sensor Adj</label>
              <div class="col-sm-2">
@ -403,7 +410,7 @@
            </div>

            <div class="row mb-3">
-              <div class="col-sm-3 offset-sm-2">
+              <div class="col-sm-4 offset-sm-2">
                <div class="form-check">
                  <input class="form-check-input" type="checkbox" name="gyro-temp" id="gyro-temp" data-bs-toggle="tooltip" title="Use the temperature sensor in the gyro instead of DS18B20, require 300s update interval to be accurate">
                  <label class="form-check-label" for="gyro-temp">Use gyro temperature</label>
@ -411,6 +418,15 @@
              </div>
            </div>

+            <div class="row mb-3">
+              <div class="col-sm-4 offset-sm-2">
+                <div class="form-check">
+                  <input class="form-check-input" type="checkbox" name="storage-sleep" id="storage-sleep" data-bs-toggle="tooltip" title="If enabled and the device is placed on its cap (less than 5 degress) it will go into sleep for 2000 minutes">
+                  <label class="form-check-label" for="storage-sleep">Enable storage mode when placed on cap</label>
+                </div>
+              </div>
+            </div>
+
            <div class="row mb-3">
              <label class="col-sm-2 col-form-label" for="ble">Bluetooth tilt color:</label>
              <div class="col-sm-2">
@ -856,10 +872,12 @@
        $("#mqtt-pass").val(cfg["mqtt-pass"]);
        $("#sleep-interval").val(cfg["sleep-interval"]);
        $("#voltage-factor").val(cfg["voltage-factor"]);
+        $("#voltage-config").val(cfg["voltage-config"]);
        $("#gravity-formula").val(cfg["gravity-formula"]);
        $("#temp-adjustment-value").val(cfg["temp-adjustment-value"]);
        $("#gravity-temp-adjustment").prop( "checked", cfg["gravity-temp-adjustment"] );
        $("#gyro-temp").prop( "checked", cfg["gyro-temp"] );
+        $("#storage-sleep").prop( "checked", cfg["storage-sleep"] );
        $("#gyro-calibration-data").text( cfg["gyro-calibration-data"]["ax"] + "," + cfg["gyro-calibration-data"]["ay"] + "," + cfg["gyro-calibration-data"]["az"] + "," + cfg["gyro-calibration-data"]["gx"] + "," + cfg["gyro-calibration-data"]["gy"] + "," + cfg["gyro-calibration-data"]["gz"] );
        $("#battery").text(cfg["battery"] + " V");
        $("#angle").text(cfg["angle"]);
--- a/html/config.min.htm
+++ b/html/config.min.htm
--- a/html/format.htm
+++ b/html/format.htm
@ -96,12 +96,13 @@

            <script>
              let formatTemplates = [
-              { "id": "GravityMon-Post", "format": "%7B%0A%20%22name%22%20%3A%20%22%24%7Bmdns%7D%22%2C%0A%20%22ID%22%3A%20%22%24%7Bid%7D%22%2C%0A%20%22token%22%20%3A%20%22gravmon%22%2C%0A%20%22interval%22%3A%20%24%7Bsleep-interval%7D%2C%0A%20%22temperature%22%3A%20%24%7Btemp%7D%2C%0A%20%22temp_units%22%3A%20%22%24%7Btemp-unit%7D%22%2C%0A%20%22gravity%22%3A%20%24%7Bgravity%7D%2C%0A%20%22angle%22%3A%20%24%7Bangle%7D%2C%0A%20%22battery%22%3A%20%24%7Bbattery%7D%2C%0A%20%22RSSI%22%3A%20%24%7Brssi%7D%2C%0A%20%22corr-gravity%22%3A%20%24%7Bcorr-gravity%7D%2C%0A%20%22gravity-unit%22%3A%20%22%24%7Bgravity-unit%7D%22%2C%0A%20%22run-time%22%3A%20%24%7Brun-time%7D%0A%7D" },
+              { "id": "GravityMon-Post", "format": "%7B%20%22name%22%20%3A%20%22%24%7Bmdns%7D%22%2C%20%22ID%22%3A%20%22%24%7Bid%7D%22%2C%20%22token%22%20%3A%20%22%24%7Btoken%7D%22%2C%20%22interval%22%3A%20%24%7Bsleep-interval%7D%2C%20%22temperature%22%3A%20%24%7Btemp%7D%2C%20%22temp_units%22%3A%20%22%24%7Btemp-unit%7D%22%2C%20%22gravity%22%3A%20%24%7Bgravity%7D%2C%20%22angle%22%3A%20%24%7Bangle%7D%2C%20%22battery%22%3A%20%24%7Bbattery%7D%2C%20%22RSSI%22%3A%20%24%7Brssi%7D%2C%20%22corr-gravity%22%3A%20%24%7Bcorr-gravity%7D%2C%20%22gravity-unit%22%3A%20%22%24%7Bgravity-unit%7D%22%2C%20%22run-time%22%3A%20%24%7Brun-time%7D%7D" },
              { "id": "GravityMon-Get", "format": "%3Fname%3D%24%7Bmdns%7D%26id%3D%24%7Bid%7D%26token%3D%24%7Btoken2%7D%26interval%3D%24%7Bsleep-interval%7D%26temperature%3D%24%7Btemp%7D%26%0Atemp-units%3D%24%7Btemp-unit%7D%26gravity%3D%24%7Bgravity%7D%26angle%3D%24%7Bangle%7D%26battery%3D%24%7Bbattery%7D%26rssi%3D%24%7Brssi%7D%26%0Acorr-gravity%3D%24%7Bcorr-gravity%7D%26gravity-unit%3D%24%7Bgravity-unit%7D%26run-time%3D%24%7Brun-time%7D" },
-              { "id": "iSpindle-Post", "format": "%7B%0A%20%22name%22%20%3A%20%22%24%7Bmdns%7D%22%2C%0A%20%22ID%22%3A%20%22%24%7Bid%7D%22%2C%0A%20%22token%22%20%3A%20%22gravmon%22%2C%0A%20%22interval%22%3A%20%24%7Bsleep-interval%7D%2C%0A%20%22temperature%22%3A%20%24%7Btemp%7D%2C%0A%20%22temp_units%22%3A%20%22%24%7Btemp-unit%7D%22%2C%0A%20%22gravity%22%3A%20%24%7Bgravity%7D%2C%0A%20%22angle%22%3A%20%24%7Bangle%7D%2C%0A%20%22battery%22%3A%20%24%7Bbattery%7D%2C%0A%20%22RSSI%22%3A%20%24%7Brssi%7D%0A%7D" },
-              { "id": "BrewFatherCustom-Post", "format": "%7B%0A%20%20%20%22name%22%3A%20%22%24%7Bmdns%7D%22%2C%0A%20%20%20%22temp%22%3A%20%24%7Btemp%7D%2C%0A%20%20%20%22aux_temp%22%3A%200%2C%0A%20%20%20%22ext_temp%22%3A%200%2C%0A%20%20%20%22temp_unit%22%3A%20%22%24%7Btemp-unit%7D%22%2C%0A%20%20%20%22gravity%22%3A%20%24%7Bgravity%7D%2C%0A%20%20%20%22gravity_unit%22%3A%20%22%24%7Bgravity-unit%7D%22%2C%0A%20%20%20%22pressure%22%3A%200%2C%0A%20%20%20%22pressure_unit%22%3A%20%22PSI%22%2C%0A%20%20%20%22ph%22%3A%200%2C%0A%20%20%20%22bpm%22%3A%200%2C%0A%20%20%20%22comment%22%3A%20%22%22%2C%0A%20%20%20%22beer%22%3A%20%22%22%2C%0A%20%20%20%22battery%22%3A%20%24%7Bbattery%7D%0A%7D" },
+              { "id": "iSpindle-Post", "format": "%7B%20%22name%22%20%3A%20%22%24%7Bmdns%7D%22%2C%20%22ID%22%3A%20%22%24%7Bid%7D%22%2C%20%22token%22%20%3A%20%22%24%7Btoken%7D%22%2C%20%22interval%22%3A%20%24%7Bsleep-interval%7D%2C%20%22temperature%22%3A%20%24%7Btemp%7D%2C%20%22temp_units%22%3A%20%22%24%7Btemp-unit%7D%22%2C%20%22gravity%22%3A%20%24%7Bgravity%7D%2C%20%22angle%22%3A%20%24%7Bangle%7D%2C%20%22battery%22%3A%20%24%7Bbattery%7D%2C%20%22RSSI%22%3A%20%24%7Brssi%7D%7D" },
+              { "id": "BrewFatherCustom-Post", "format": "%7B%20%20%20%22name%22%3A%20%22%24%7Bmdns%7D%22%2C%20%20%20%22temp%22%3A%20%24%7Btemp%7D%2C%20%20%20%22aux_temp%22%3A%200%2C%20%20%20%22ext_temp%22%3A%200%2C%20%20%20%22temp_unit%22%3A%20%22%24%7Btemp-unit%7D%22%2C%20%20%20%22gravity%22%3A%20%24%7Bgravity%7D%2C%20%20%20%22gravity_unit%22%3A%20%22%24%7Bgravity-unit%7D%22%2C%20%20%20%22pressure%22%3A%200%2C%20%20%20%22pressure_unit%22%3A%20%22PSI%22%2C%20%20%20%22ph%22%3A%200%2C%20%20%20%22bpm%22%3A%200%2C%20%20%20%22comment%22%3A%20%22%22%2C%20%20%20%22beer%22%3A%20%22%22%2C%20%20%20%22battery%22%3A%20%24%7Bbattery%7D%7D" },
              { "id": "iSpindle-Mqtt", "format": "ispindel%2F%24%7Bmdns%7D%2Ftilt%3A%24%7Bangle%7D%7C%0Aispindel%2F%24%7Bmdns%7D%2Ftemperature%3A%24%7Btemp%7D%7C%0Aispindel%2F%24%7Bmdns%7D%2Ftemp_units%3A%24%7Btemp-unit%7D%7C%0Aispindel%2F%24%7Bmdns%7D%2Fbattery%3A%24%7Bbattery%7D%7C%0Aispindel%2F%24%7Bmdns%7D%2Fgravity%3A%24%7Bgravity%7D%7C%0Aispindel%2F%24%7Bmdns%7D%2Finterval%3A%24%7Bsleep-interval%7D%7C%0Aispindel%2F%24%7Bmdns%7D%2FRSSI%3A%24%7Brssi%7D%7C" },
              { "id": "HomeAssistant-Mqtt", "format": "gravmon%2F%24%7Bmdns%7D%2Ftilt%3A%24%7Bangle%7D%7C%0Agravmon%2F%24%7Bmdns%7D%2Ftemperature%3A%24%7Btemp%7D%7C%0Agravmon%2F%24%7Bmdns%7D%2Ftemp_units%3A%24%7Btemp-unit%7D%7C" },
+              { "id": "Brewblox-Mqtt", "format": "brewcast%2Fhistory%3A%7B%22key%22%3A%22%24%7Bmdns%7D%22%2C%22data%22%3A%7B%22Temperature%5BdegC%5D%22%3A%20%24%7Btemp-c%7D%2C%22Temperature%5BdegF%5D%22%3A%20%24%7Btemp-f%7D%2C%22Battery%5BV%5D%22%3A%24%7Bbattery%7D%2C%22Tilt%5Bdeg%5D%22%3A%24%7Bangle%7D%2C%22Rssi%5BdBm%5D%22%3A%24%7Brssi%7D%2C%22SG%22%3A%24%7Bgravity-sg%7D%2C%22Plato%22%3A%24%7Bgravity-plato%7D%7D%7D%7C" },
              { "id": "UBIDots-Post", "format": "%7B%0A%20%20%20%22temperature%22%3A%20%24%7Btemp%7D%2C%0A%20%20%20%22gravity%22%3A%20%24%7Bgravity%7D%2C%0A%20%20%20%22angle%22%3A%20%24%7Bangle%7D%2C%0A%20%20%20%22battery%22%3A%20%24%7Bbattery%7D%2C%0A%20%20%20%22rssi%22%3A%20%24%7Brssi%7D%0A%7D" } ];
            </script>

@ -116,8 +117,10 @@
                <option value="iSpindle-Mqtt">iSpindle (MQTT)</option>
                <option value="HomeAssistant-Mqtt">Home Assistant (MQTT)</option>
                <option value="UBIDots-Post">UBIdots (POST)</option>
-                <option value="BrewFatherCustom-Post">Brewfather Custom Endpoint (POST)</option>
+                <option value="BrewFatherCustom-Post">Brewfather - Custom Endpoint (POST)</option>
+                <option value="iSpindle-Post">Brewfather - iSpindle Endpoint (POST)</option>
                <option value="GravityMon-Get">GravityMon (GET)</option>
+                <option value="Brewblox-Mqtt">BrewBlox (MQTT)</option>
              </select>
              <div class="col-sm-4">
                <button class="btn btn-secondary" id="copy-btn" data-bs-toggle="tooltip" title="Copy the selected format template to the selected push target">Copy format</button>
--- a/html/format.min.htm
+++ b/html/format.min.htm
--- a/lib/ESP_DoubleResetDetector/ESP_DoubleResetDetector.h
+++ b/lib/ESP_DoubleResetDetector/ESP_DoubleResetDetector.h
@ -0,0 +1,399 @@
+/****************************************************************************************************************************
+  ESP_DoubleResetDetector.h
+  For ESP8266 / ESP32 boards
+
+  ESP_DoubleResetDetector is a library for the ESP8266/Arduino platform
+  to enable trigger configure mode by resetting ESP32 / ESP8266 twice.
+
+  Forked from DataCute https://github.com/datacute/DoubleResetDetector
+
+  Built by Khoi Hoang https://github.com/khoih-prog/ESP_DoubleResetDetector
+  Licensed under MIT license
+  Version: 1.3.1
+
+  Version Modified By   Date      Comments
+  ------- -----------  ---------- -----------
+  1.0.0   K Hoang      15/12/2019 Initial coding
+  1.0.1   K Hoang      30/12/2019 Now can use EEPROM or SPIFFS for both ESP8266 and ESP32. RTC still OK for ESP8266
+  1.0.2   K Hoang      10/04/2020 Fix bug by left-over cpp file and in example.
+  1.0.3   K Hoang      13/05/2020 Update to use LittleFS for ESP8266 core 2.7.1+
+  1.1.0   K Hoang      04/12/2020 Add support to LittleFS for ESP32 using LITTLEFS Library
+  1.1.1   K Hoang      28/12/2020 Suppress all possible compiler warnings
+  1.1.2   K Hoang      10/10/2021 Update `platform.ini` and `library.json`
+  1.2.0   K Hoang      26/11/2021 Auto detect ESP32 core and use either built-in LittleFS or LITTLEFS library
+  1.2.1   K Hoang      26/11/2021 Fix compile error for ESP32 core v1.0.5-
+  1.3.0   K Hoang      10/02/2022 Add support to new ESP32-S3
+  1.3.1   K Hoang      04/03/2022 Add waitingForDRD() function to signal in DRD wating period
+*****************************************************************************************************************************/
+
+#pragma once
+
+#ifndef ESP_DoubleResetDetector_H
+#define ESP_DoubleResetDetector_H
+
+#ifndef DOUBLERESETDETECTOR_DEBUG
+  #define DOUBLERESETDETECTOR_DEBUG       false
+#endif
+
+#if defined(ARDUINO) && (ARDUINO >= 100)
+  #include <Arduino.h>
+#else
+  #include <WProgram.h>
+#endif
+
+#ifndef ESP_DOUBLE_RESET_DETECTOR_VERSION
+  #define ESP_DOUBLE_RESET_DETECTOR_VERSION             "ESP_DoubleResetDetector v1.3.1"
+  
+  #define ESP_DOUBLE_RESET_DETECTOR_VERSION_MAJOR       1
+  #define ESP_DOUBLE_RESET_DETECTOR_VERSION_MINOR       3
+  #define ESP_DOUBLE_RESET_DETECTOR_VERSION_PATCH       1
+
+  #define ESP_DOUBLE_RESET_DETECTOR_VERSION_INT         1003001
+#endif
+
+#define ESP_DOUBLERESETDETECTOR_VERSION         ESP_DOUBLE_RESET_DETECTOR_VERSION
+
+//#define ESP_DRD_USE_EEPROM      false
+//#define ESP_DRD_USE_LITTLEFS    false
+//#define ESP_DRD_USE_SPIFFS      false
+//#define ESP8266_DRD_USE_RTC     false   //true
+
+#ifdef ESP32
+  #if (!ESP_DRD_USE_EEPROM && !ESP_DRD_USE_SPIFFS && !ESP_DRD_USE_LITTLEFS)
+  
+    #if (DOUBLERESETDETECTOR_DEBUG)
+      #warning Neither EEPROM, SPIFFS nor LittleFS selected. Default to EEPROM
+    #endif
+      
+    #ifdef ESP_DRD_USE_EEPROM
+      #undef ESP_DRD_USE_EEPROM
+      #define ESP_DRD_USE_EEPROM      true
+    #endif
+  #endif
+#endif
+
+#ifdef ESP8266
+  #if (!ESP8266_DRD_USE_RTC && !ESP_DRD_USE_EEPROM && !ESP_DRD_USE_SPIFFS && !ESP_DRD_USE_LITTLEFS)
+    #if (DOUBLERESETDETECTOR_DEBUG)
+      #warning Neither RTC, EEPROM, LITTLEFS nor SPIFFS selected. Default to EEPROM
+    #endif   
+    
+    #ifdef ESP_DRD_USE_EEPROM
+      #undef ESP_DRD_USE_EEPROM
+      #define ESP_DRD_USE_EEPROM      true
+    #endif
+  #endif
+#endif
+
+//default to use EEPROM, otherwise, use LITTLEFS (higher priority), then SPIFFS
+#if ESP_DRD_USE_EEPROM
+  #include <EEPROM.h>
+
+  #define  FLAG_DATA_SIZE     4
+
+  #ifndef EEPROM_SIZE
+    #define EEPROM_SIZE     512
+  #endif
+
+  #ifndef EEPROM_START
+    #define EEPROM_START    256
+  #endif
+
+#elif ( ESP_DRD_USE_LITTLEFS || ESP_DRD_USE_SPIFFS )
+
+#include <FS.h>
+
+#ifdef ESP32
+
+  #if ESP_DRD_USE_LITTLEFS
+    // Check cores/esp32/esp_arduino_version.h and cores/esp32/core_version.h
+    //#if ( ESP_ARDUINO_VERSION >= ESP_ARDUINO_VERSION_VAL(2, 0, 0) )  //(ESP_ARDUINO_VERSION_MAJOR >= 2)
+    #if ( defined(ESP_ARDUINO_VERSION_MAJOR) && (ESP_ARDUINO_VERSION_MAJOR >= 2) )
+      #if (DOUBLERESETDETECTOR_DEBUG)
+        #warning Using ESP32 Core 1.0.6 or 2.0.0+
+      #endif 
+      
+      // The library has been merged into esp32 core from release 1.0.6
+      #include <LittleFS.h>
+      
+      #define FileFS        LittleFS
+      #define FS_Name       "LittleFS"
+    #else
+      #if (DOUBLERESETDETECTOR_DEBUG)
+        #warning Using ESP32 Core 1.0.5-. You must install LITTLEFS library
+      #endif 
+      
+      // The library has been merged into esp32 core from release 1.0.6
+      #include <LITTLEFS.h>             // https://github.com/lorol/LITTLEFS
+      
+      #define FileFS        LITTLEFS
+      #define FS_Name       "LittleFS"
+    #endif
+  #else
+    #include "SPIFFS.h"
+    // ESP32 core 1.0.4 still uses SPIFFS
+    #define FileFS   SPIFFS
+  #endif
+
+#else
+  // From ESP8266 core 2.7.1
+  #include <LittleFS.h>
+
+  #if ESP_DRD_USE_LITTLEFS
+    #define FileFS    LittleFS
+  #else
+    #define FileFS   SPIFFS
+  #endif
+
+#endif    // #if ESP_DRD_USE_EEPROM
+
+
+
+#define  DRD_FILENAME     "/drd.dat"
+
+#endif    //#if ESP_DRD_USE_EEPROM
+
+
+
+#define DOUBLERESETDETECTOR_FLAG_SET    0xD0D01234
+#define DOUBLERESETDETECTOR_FLAG_CLEAR  0xD0D04321
+
+class DoubleResetDetector
+{
+  public:
+    DoubleResetDetector(int timeout, int address)
+    {
+#if ESP_DRD_USE_EEPROM
+#if (DOUBLERESETDETECTOR_DEBUG)
+      Serial.printf("EEPROM size = %d, start = %d\n", EEPROM_SIZE, EEPROM_START);
+#endif
+
+      EEPROM.begin(EEPROM_SIZE);
+#elif ( ESP_DRD_USE_LITTLEFS || ESP_DRD_USE_SPIFFS )
+      // LittleFS / SPIFFS code
+      if (!FileFS.begin())
+      {
+#if (DOUBLERESETDETECTOR_DEBUG)
+
+#if ESP_DRD_USE_LITTLEFS
+        Serial.println("LittleFS failed!. Please use SPIFFS or EEPROM.");
+#else
+        Serial.println("SPIFFS failed!. Please use LittleFS or EEPROM.");
+#endif
+
+#endif
+      }
+#else
+#ifdef ESP8266
+      //RTC only for ESP8266
+#endif
+#endif
+
+      this->timeout = timeout * 1000;
+      this->address = address;
+      doubleResetDetected = false;
+      waitingForDoubleReset = false;
+    };
+
+    bool detectDoubleReset()
+    {
+      doubleResetDetected = detectRecentlyResetFlag();
+
+      if (doubleResetDetected)
+      {
+#if (DOUBLERESETDETECTOR_DEBUG)
+        Serial.println("doubleResetDetected");
+#endif
+
+        clearRecentlyResetFlag();
+      }
+      else
+      {
+#if (DOUBLERESETDETECTOR_DEBUG)
+        Serial.println("No doubleResetDetected");
+#endif
+
+        setRecentlyResetFlag();
+        waitingForDoubleReset = true;
+      }
+
+      return doubleResetDetected;
+
+    };
+    
+    bool waitingForDRD()
+    {
+      return waitingForDoubleReset;
+    }
+
+    void loop()
+    {
+      if (waitingForDoubleReset && millis() > timeout)
+      {
+#if (DOUBLERESETDETECTOR_DEBUG)
+        Serial.println("Stop doubleResetDetecting");
+#endif
+
+        stop();
+      }
+    };
+
+    void stop()
+    {
+      clearRecentlyResetFlag();
+      waitingForDoubleReset = false;
+    };
+
+    bool doubleResetDetected;
+
+
+  private:
+    uint32_t DOUBLERESETDETECTOR_FLAG;
+    unsigned long timeout;
+    int address;
+    bool waitingForDoubleReset;
+
+    bool detectRecentlyResetFlag()
+    {
+#if (ESP_DRD_USE_EEPROM)
+      EEPROM.get(EEPROM_START, DOUBLERESETDETECTOR_FLAG);
+      doubleResetDetectorFlag = DOUBLERESETDETECTOR_FLAG;
+
+#if (DOUBLERESETDETECTOR_DEBUG)
+      Serial.printf("EEPROM Flag read = 0x%X\n", DOUBLERESETDETECTOR_FLAG);
+#endif
+#elif ( ESP_DRD_USE_LITTLEFS || ESP_DRD_USE_SPIFFS )
+      // LittleFS / SPIFFS code
+      if (FileFS.exists(DRD_FILENAME))
+      {
+        // if config file exists, load
+        File file = FileFS.open(DRD_FILENAME, "r");
+
+        if (!file)
+        {
+#if (DOUBLERESETDETECTOR_DEBUG)
+          Serial.println("Loading config file failed");
+#endif
+        }
+
+        file.readBytes((char *) &DOUBLERESETDETECTOR_FLAG, sizeof(DOUBLERESETDETECTOR_FLAG));
+        doubleResetDetectorFlag = DOUBLERESETDETECTOR_FLAG;
+
+#if (DOUBLERESETDETECTOR_DEBUG)
+
+#if ESP_DRD_USE_LITTLEFS
+        Serial.printf("LittleFS Flag read = 0x%X\n", DOUBLERESETDETECTOR_FLAG);
+#else
+        Serial.printf("SPIFFS Flag read = 0x%X\n", DOUBLERESETDETECTOR_FLAG);
+#endif
+
+#endif
+
+        file.close();
+      }
+#else
+#ifdef ESP8266
+      //RTC only for ESP8266
+      ESP.rtcUserMemoryRead(address, &doubleResetDetectorFlag, sizeof(doubleResetDetectorFlag));
+#endif
+#endif
+
+      doubleResetDetected = (doubleResetDetectorFlag == DOUBLERESETDETECTOR_FLAG_SET);
+      return doubleResetDetected;
+    };
+
+    void setRecentlyResetFlag()
+    {
+      doubleResetDetectorFlag = DOUBLERESETDETECTOR_FLAG_SET;
+
+      DOUBLERESETDETECTOR_FLAG = DOUBLERESETDETECTOR_FLAG_SET;
+
+#if (ESP_DRD_USE_EEPROM)
+      EEPROM.put(EEPROM_START, DOUBLERESETDETECTOR_FLAG);
+      EEPROM.commit();
+
+#if (DOUBLERESETDETECTOR_DEBUG)
+      delay(1000);
+      EEPROM.get(EEPROM_START, DOUBLERESETDETECTOR_FLAG);
+
+      Serial.printf("SetFlag write = 0x%X\n", DOUBLERESETDETECTOR_FLAG);
+#endif
+#elif ( ESP_DRD_USE_LITTLEFS || ESP_DRD_USE_SPIFFS )
+      // LittleFS / SPIFFS code
+      File file = FileFS.open(DRD_FILENAME, "w");
+#if (DOUBLERESETDETECTOR_DEBUG)
+      Serial.println("Saving config file...");
+#endif
+
+      if (file)
+      {
+        file.write((uint8_t *) &DOUBLERESETDETECTOR_FLAG, sizeof(DOUBLERESETDETECTOR_FLAG));
+        file.close();
+#if (DOUBLERESETDETECTOR_DEBUG)
+        Serial.println("Saving config file OK");
+#endif
+      }
+      else
+      {
+#if (DOUBLERESETDETECTOR_DEBUG)
+        Serial.println("Saving config file failed");
+#endif
+      }
+#else
+#ifdef ESP8266
+      //RTC only for ESP8266
+      ESP.rtcUserMemoryWrite(address, &doubleResetDetectorFlag, sizeof(doubleResetDetectorFlag));
+#endif
+#endif
+    };
+
+
+    void clearRecentlyResetFlag()
+    {
+      doubleResetDetectorFlag = DOUBLERESETDETECTOR_FLAG_CLEAR;
+      DOUBLERESETDETECTOR_FLAG = DOUBLERESETDETECTOR_FLAG_CLEAR;
+
+#if (ESP_DRD_USE_EEPROM)
+      //DOUBLERESETDETECTOR_FLAG = DOUBLERESETDETECTOR_FLAG_CLEAR;
+      EEPROM.put(EEPROM_START, DOUBLERESETDETECTOR_FLAG);
+      EEPROM.commit();
+
+#if (DOUBLERESETDETECTOR_DEBUG)
+      delay(1000);
+      EEPROM.get(EEPROM_START, DOUBLERESETDETECTOR_FLAG);
+
+      Serial.printf("ClearFlag write = 0x%X\n", DOUBLERESETDETECTOR_FLAG);
+#endif
+#elif ( ESP_DRD_USE_LITTLEFS || ESP_DRD_USE_SPIFFS )
+      // LittleFS / SPIFFS code
+      File file = FileFS.open(DRD_FILENAME, "w");
+#if (DOUBLERESETDETECTOR_DEBUG)
+      Serial.println("Saving config file...");
+#endif
+
+      if (file)
+      {
+        file.write((uint8_t *) &DOUBLERESETDETECTOR_FLAG, sizeof(DOUBLERESETDETECTOR_FLAG));
+        file.close();
+#if (DOUBLERESETDETECTOR_DEBUG)
+        Serial.println("Saving config file OK");
+#endif
+      }
+      else
+      {
+#if (DOUBLERESETDETECTOR_DEBUG)
+        Serial.println("Saving config file failed");
+#endif
+      }
+
+#else
+#ifdef ESP8266
+      //RTC only for ESP8266
+      ESP.rtcUserMemoryWrite(address, &doubleResetDetectorFlag, sizeof(doubleResetDetectorFlag));
+#endif
+#endif
+    };
+
+    uint32_t doubleResetDetectorFlag;
+};
+#endif // ESP_DoubleResetDetector_H
--- a/lib/ESP_WifiManager/ESP_WiFiManager-Impl.h
+++ b/lib/ESP_WifiManager/ESP_WiFiManager-Impl.h
--- a/lib/ESP_WifiManager/ESP_WiFiManager.h
+++ b/lib/ESP_WifiManager/ESP_WiFiManager.h
@ -0,0 +1,72 @@
+/****************************************************************************************************************************
+  ESP_WiFiManager.h
+  For ESP8266 / ESP32 boards
+
+  ESP_WiFiManager is a library for the ESP8266/Arduino platform
+  (https://github.com/esp8266/Arduino) to enable easy
+  configuration and reconfiguration of WiFi credentials using a Captive Portal
+  inspired by:
+  http://www.esp8266.com/viewtopic.php?f=29&t=2520
+  https://github.com/chriscook8/esp-arduino-apboot
+  https://github.com/esp8266/Arduino/blob/master/libraries/DNSServer/examples/CaptivePortalAdvanced/
+
+  Modified from Tzapu https://github.com/tzapu/WiFiManager
+  and from Ken Taylor https://github.com/kentaylor
+
+  Built by Khoi Hoang https://github.com/khoih-prog/ESP_WiFiManager
+  Licensed under MIT license
+  
+  Version: 1.9.0
+
+  Version Modified By   Date      Comments
+  ------- -----------  ---------- -----------
+  1.0.0   K Hoang      07/10/2019 Initial coding
+  1.0.1   K Hoang      13/12/2019 Fix bug. Add features. Add support for ESP32
+  1.0.2   K Hoang      19/12/2019 Fix bug thatkeeps ConfigPortal in endless loop if Portal/Router SSID or Password is NULL.
+  1.0.3   K Hoang      05/01/2020 Option not displaying AvailablePages in Info page. Enhance README.md. Modify examples
+  1.0.4   K Hoang      07/01/2020 Add RFC952 setHostname feature.
+  1.0.5   K Hoang      15/01/2020 Add configurable DNS feature. Thanks to @Amorphous of https://community.blynk.cc
+  1.0.6   K Hoang      03/02/2020 Add support for ArduinoJson version 6.0.0+ ( tested with v6.14.1 )
+  1.0.7   K Hoang      13/04/2020 Reduce start time, fix SPIFFS bug in examples, update README.md
+  1.0.8   K Hoang      10/06/2020 Fix STAstaticIP issue. Restructure code. Add LittleFS support for ESP8266 core 2.7.1+
+  1.0.9   K Hoang      29/07/2020 Fix ESP32 STAstaticIP bug. Permit changing from DHCP <-> static IP using Config Portal.
+                                  Add, enhance examples (fix MDNS for ESP32)
+  1.0.10  K Hoang      08/08/2020 Add more features to Config Portal. Use random WiFi AP channel to avoid conflict.
+  1.0.11  K Hoang      17/08/2020 Add CORS feature. Fix bug in softAP, autoConnect, resetSettings.
+  1.1.0   K Hoang      28/08/2020 Add MultiWiFi feature to autoconnect to best WiFi at runtime
+  1.1.1   K Hoang      30/08/2020 Add setCORSHeader function to allow flexible CORS. Fix typo and minor improvement.
+  1.1.2   K Hoang      17/08/2020 Fix bug. Add example.
+  1.2.0   K Hoang      09/10/2020 Restore cpp code besides Impl.h code to use if linker error. Fix bug.
+  1.3.0   K Hoang      04/12/2020 Add LittleFS support to ESP32 using LITTLEFS Library
+  1.4.1   K Hoang      22/12/2020 Fix staticIP not saved. Add functions. Add complex examples. Sync with ESPAsync_WiFiManager
+  1.4.2   K Hoang      14/01/2021 Fix examples' bug not using saved WiFi Credentials after losing all WiFi connections.
+  1.4.3   K Hoang      23/01/2021 Fix examples' bug not saving Static IP in certain cases.
+  1.5.0   K Hoang      12/02/2021 Add support to new ESP32-S2
+  1.5.1   K Hoang      26/03/2021 Fix compiler error if setting Compiler Warnings to All. Retest with esp32 core v1.0.6
+  1.5.2   K Hoang      08/04/2021 Fix example misleading messages.
+  1.5.3   K Hoang      13/04/2021 Add dnsServer error message.
+  1.6.0   K Hoang      20/04/2021 Add support to new ESP32-C3 using SPIFFS or EEPROM
+  1.6.1   K Hoang      25/04/2021 Fix MultiWiFi bug. Fix captive-portal bug if CP AP address is not default 192.168.4.1
+  1.7.0   K Hoang      06/05/2021 Set _timezoneName. Add support to new ESP32-S2 (METRO_ESP32S2, FUNHOUSE_ESP32S2, etc.)
+  1.7.1   K Hoang      08/05/2021 Fix Json bug. Fix timezoneName not displayed in Info page.
+  1.7.2   K Hoang      08/05/2021 Fix warnings with ESP8266 core v3.0.0
+  1.7.3   K Hoang      29/07/2021 Fix MultiWiFi connection issue with ESP32 core v2.0.0-rc1+
+  1.7.4   K Hoang      13/08/2021 Add WiFi scanning of hidden SSIDs
+  1.7.5   K Hoang      10/10/2021 Update `platform.ini` and `library.json`
+  1.7.6   K Hoang      26/11/2021 Auto detect ESP32 core and use either built-in LittleFS or LITTLEFS library
+  1.7.7   K Hoang      26/11/2021 Fix compile error for ESP32 core v1.0.5-
+  1.7.8   K Hoang      30/11/2021 Fix bug to permit using HTTP port different from 80. Fix bug
+  1.8.0   K Hoang      29/12/2021 Fix `multiple-definitions` linker error and weird bug related to src_cpp
+  1.9.0   K Hoang      17/01/2022 Enable compatibility with old code to include only ESP_WiFiManager.h
+ *****************************************************************************************************************************/
+
+#pragma once
+
+#ifndef ESP_WiFiManager_h
+#define ESP_WiFiManager_h
+
+#include <ESP_WiFiManager.hpp>              //https://github.com/khoih-prog/ESP_WiFiManager
+#include <ESP_WiFiManager-Impl.h>           //https://github.com/khoih-prog/ESP_WiFiManager
+
+#endif    // ESP_WiFiManager_h
+
--- a/lib/ESP_WifiManager/ESP_WiFiManager.hpp
+++ b/lib/ESP_WifiManager/ESP_WiFiManager.hpp
--- a/lib/ESP_WifiManager/ESP_WiFiManager_Debug.h
+++ b/lib/ESP_WifiManager/ESP_WiFiManager_Debug.h
@ -0,0 +1,128 @@
+/****************************************************************************************************************************
+  ESP_WiFiManager_Debug.h
+  For ESP8266 / ESP32 boards
+
+  ESP_WiFiManager is a library for the ESP8266/Arduino platform
+  (https://github.com/esp8266/Arduino) to enable easy
+  configuration and reconfiguration of WiFi credentials using a Captive Portal
+  inspired by:
+  http://www.esp8266.com/viewtopic.php?f=29&t=2520
+  https://github.com/chriscook8/esp-arduino-apboot
+  https://github.com/esp8266/Arduino/blob/master/libraries/DNSServer/examples/CaptivePortalAdvanced/
+
+  Modified from Tzapu https://github.com/tzapu/WiFiManager
+  and from Ken Taylor https://github.com/kentaylor
+
+  Built by Khoi Hoang https://github.com/khoih-prog/ESP_WiFiManager
+  Licensed under MIT license
+  
+  Version: 1.9.0
+
+  Version Modified By   Date      Comments
+  ------- -----------  ---------- -----------
+  1.0.0   K Hoang      07/10/2019 Initial coding
+  1.0.1   K Hoang      13/12/2019 Fix bug. Add features. Add support for ESP32
+  1.0.2   K Hoang      19/12/2019 Fix bug thatkeeps ConfigPortal in endless loop if Portal/Router SSID or Password is NULL.
+  1.0.3   K Hoang      05/01/2020 Option not displaying AvailablePages in Info page. Enhance README.md. Modify examples
+  1.0.4   K Hoang      07/01/2020 Add RFC952 setHostname feature.
+  1.0.5   K Hoang      15/01/2020 Add configurable DNS feature. Thanks to @Amorphous of https://community.blynk.cc
+  1.0.6   K Hoang      03/02/2020 Add support for ArduinoJson version 6.0.0+ ( tested with v6.14.1 )
+  1.0.7   K Hoang      13/04/2020 Reduce start time, fix SPIFFS bug in examples, update README.md
+  1.0.8   K Hoang      10/06/2020 Fix STAstaticIP issue. Restructure code. Add LittleFS support for ESP8266 core 2.7.1+
+  1.0.9   K Hoang      29/07/2020 Fix ESP32 STAstaticIP bug. Permit changing from DHCP <-> static IP using Config Portal.
+                                  Add, enhance examples (fix MDNS for ESP32)
+  1.0.10  K Hoang      08/08/2020 Add more features to Config Portal. Use random WiFi AP channel to avoid conflict.
+  1.0.11  K Hoang      17/08/2020 Add CORS feature. Fix bug in softAP, autoConnect, resetSettings.
+  1.1.0   K Hoang      28/08/2020 Add MultiWiFi feature to autoconnect to best WiFi at runtime
+  1.1.1   K Hoang      30/08/2020 Add setCORSHeader function to allow flexible CORS. Fix typo and minor improvement.
+  1.1.2   K Hoang      17/08/2020 Fix bug. Add example.
+  1.2.0   K Hoang      09/10/2020 Restore cpp code besides Impl.h code to use if linker error. Fix bug.
+  1.3.0   K Hoang      04/12/2020 Add LittleFS support to ESP32 using LITTLEFS Library
+  1.4.1   K Hoang      22/12/2020 Fix staticIP not saved. Add functions. Add complex examples. Sync with ESPAsync_WiFiManager
+  1.4.2   K Hoang      14/01/2021 Fix examples' bug not using saved WiFi Credentials after losing all WiFi connections.
+  1.4.3   K Hoang      23/01/2021 Fix examples' bug not saving Static IP in certain cases.
+  1.5.0   K Hoang      12/02/2021 Add support to new ESP32-S2
+  1.5.1   K Hoang      26/03/2021 Fix compiler error if setting Compiler Warnings to All. Retest with esp32 core v1.0.6
+  1.5.2   K Hoang      08/04/2021 Fix example misleading messages.
+  1.5.3   K Hoang      13/04/2021 Add dnsServer error message.
+  1.6.0   K Hoang      20/04/2021 Add support to new ESP32-C3 using SPIFFS or EEPROM
+  1.6.1   K Hoang      25/04/2021 Fix MultiWiFi bug. Fix captive-portal bug if CP AP address is not default 192.168.4.1
+  1.7.0   K Hoang      06/05/2021 Set _timezoneName. Add support to new ESP32-S2 (METRO_ESP32S2, FUNHOUSE_ESP32S2, etc.)
+  1.7.1   K Hoang      08/05/2021 Fix Json bug. Fix timezoneName not displayed in Info page.
+  1.7.2   K Hoang      08/05/2021 Fix warnings with ESP8266 core v3.0.0
+  1.7.3   K Hoang      29/07/2021 Fix MultiWiFi connection issue with ESP32 core v2.0.0-rc1+
+  1.7.4   K Hoang      13/08/2021 Add WiFi scanning of hidden SSIDs
+  1.7.5   K Hoang      10/10/2021 Update `platform.ini` and `library.json`
+  1.7.6   K Hoang      26/11/2021 Auto detect ESP32 core and use either built-in LittleFS or LITTLEFS library
+  1.7.7   K Hoang      26/11/2021 Fix compile error for ESP32 core v1.0.5-
+  1.7.8   K Hoang      30/11/2021 Fix bug to permit using HTTP port different from 80. Fix bug
+  1.8.0   K Hoang      29/12/2021 Fix `multiple-definitions` linker error and weird bug related to src_cpp
+  1.9.0   K Hoang      17/01/2022 Enable compatibility with old code to include only ESP_WiFiManager.h
+ *****************************************************************************************************************************/
+
+#pragma once
+
+#ifndef ESP_WiFiManager_Debug_H
+#define ESP_WiFiManager_Debug_H
+
+#ifdef WIFIMGR_DEBUG_PORT
+  #define WM_DBG_PORT      WIFIMGR_DEBUG_PORT
+#else
+  #define WM_DBG_PORT      Serial
+#endif
+
+// Change _WIFIMGR_LOGLEVEL_ to set tracing and logging verbosity
+// 0: DISABLED: no logging
+// 1: ERROR: errors
+// 2: WARN: errors and warnings
+// 3: INFO: errors, warnings and informational (default)
+// 4: DEBUG: errors, warnings, informational and debug
+
+#ifndef _WIFIMGR_LOGLEVEL_
+  #define _WIFIMGR_LOGLEVEL_       0
+#endif
+
+const char WM_MARK[] = "[WM] ";
+const char WM_SP[]   = " ";
+
+#define WM_PRINT        WM_DBG_PORT.print
+#define WM_PRINTLN      WM_DBG_PORT.println
+
+#define WM_PRINT_MARK   WM_PRINT(WM_MARK)
+#define WM_PRINT_SP     WM_PRINT(WM_SP)
+
+////////////////////////////////////////////////////
+
+#define LOGERROR(x)         if(_WIFIMGR_LOGLEVEL_>0) { WM_PRINT_MARK; WM_PRINTLN(x); }
+#define LOGERROR0(x)        if(_WIFIMGR_LOGLEVEL_>0) { WM_PRINT(x); }
+#define LOGERROR1(x,y)      if(_WIFIMGR_LOGLEVEL_>0) { WM_PRINT_MARK; WM_PRINT(x); WM_PRINT_SP; WM_PRINTLN(y); }
+#define LOGERROR2(x,y,z)    if(_WIFIMGR_LOGLEVEL_>0) { WM_PRINT_MARK; WM_PRINT(x); WM_PRINT_SP; WM_PRINT(y); WM_PRINT_SP; WM_PRINTLN(z); }
+#define LOGERROR3(x,y,z,w)  if(_WIFIMGR_LOGLEVEL_>0) { WM_PRINT_MARK; WM_PRINT(x); WM_PRINT_SP; WM_PRINT(y); WM_PRINT_SP; WM_PRINT(z); WM_PRINT_SP; WM_PRINTLN(w); }
+
+////////////////////////////////////////////////////
+
+#define LOGWARN(x)          if(_WIFIMGR_LOGLEVEL_>1) { WM_PRINT_MARK; WM_PRINTLN(x); }
+#define LOGWARN0(x)         if(_WIFIMGR_LOGLEVEL_>1) { WM_PRINT(x); }
+#define LOGWARN1(x,y)       if(_WIFIMGR_LOGLEVEL_>1) { WM_PRINT_MARK; WM_PRINT(x); WM_PRINT_SP; WM_PRINTLN(y); }
+#define LOGWARN2(x,y,z)     if(_WIFIMGR_LOGLEVEL_>1) { WM_PRINT_MARK; WM_PRINT(x); WM_PRINT_SP; WM_PRINT(y); WM_PRINT_SP; WM_PRINTLN(z); }
+#define LOGWARN3(x,y,z,w)   if(_WIFIMGR_LOGLEVEL_>1) { WM_PRINT_MARK; WM_PRINT(x); WM_PRINT_SP; WM_PRINT(y); WM_PRINT_SP; WM_PRINT(z); WM_PRINT_SP; WM_PRINTLN(w); }
+
+////////////////////////////////////////////////////
+
+#define LOGINFO(x)          if(_WIFIMGR_LOGLEVEL_>2) { WM_PRINT_MARK; WM_PRINTLN(x); }
+#define LOGINFO0(x)         if(_WIFIMGR_LOGLEVEL_>2) { WM_PRINT(x); }
+#define LOGINFO1(x,y)       if(_WIFIMGR_LOGLEVEL_>2) { WM_PRINT_MARK; WM_PRINT(x); WM_PRINT_SP; WM_PRINTLN(y); }
+#define LOGINFO2(x,y,z)     if(_WIFIMGR_LOGLEVEL_>2) { WM_PRINT_MARK; WM_PRINT(x); WM_PRINT_SP; WM_PRINT(y); WM_PRINT_SP; WM_PRINTLN(z); }
+#define LOGINFO3(x,y,z,w)   if(_WIFIMGR_LOGLEVEL_>2) { WM_PRINT_MARK; WM_PRINT(x); WM_PRINT_SP; WM_PRINT(y); WM_PRINT_SP; WM_PRINT(z); WM_PRINT_SP; WM_PRINTLN(w); }
+
+////////////////////////////////////////////////////
+
+#define LOGDEBUG(x)         if(_WIFIMGR_LOGLEVEL_>3) { WM_PRINT_MARK; WM_PRINTLN(x); }
+#define LOGDEBUG0(x)        if(_WIFIMGR_LOGLEVEL_>3) { WM_PRINT(x); }
+#define LOGDEBUG1(x,y)      if(_WIFIMGR_LOGLEVEL_>3) { WM_PRINT_MARK; WM_PRINT(x); WM_PRINT_SP; WM_PRINTLN(y); }
+#define LOGDEBUG2(x,y,z)    if(_WIFIMGR_LOGLEVEL_>3) { WM_PRINT_MARK; WM_PRINT(x); WM_PRINT_SP; WM_PRINT(y); WM_PRINT_SP; WM_PRINTLN(z); }
+#define LOGDEBUG3(x,y,z,w)  if(_WIFIMGR_LOGLEVEL_>3) { WM_PRINT_MARK; WM_PRINT(x); WM_PRINT_SP; WM_PRINT(y); WM_PRINT_SP; WM_PRINT(z); WM_PRINT_SP; WM_PRINTLN(w); }
+
+////////////////////////////////////////////////////
+
+#endif    //ESP_WiFiManager_Debug_H
--- a/lib/ESP_WifiManager/utils/TZ.h
+++ b/lib/ESP_WifiManager/utils/TZ.h
--- a/lib/OneWire/OneWire.cpp
+++ b/lib/OneWire/OneWire.cpp
@ -195,11 +195,7 @@ uint8_t OneWire::reset(void)
 // Write a bit. Port and bit is used to cut lookup time and provide
 // more certain timing.
 //
-#if defined(ARDUINO_ARCH_ESP32)
-void IRAM_ATTR OneWire::write_bit(uint8_t v)
-#else
 void OneWire::write_bit(uint8_t v)
-#endif
 {
 	IO_REG_TYPE mask IO_REG_MASK_ATTR = bitmask;
 	volatile IO_REG_TYPE *reg IO_REG_BASE_ATTR = baseReg;
@ -227,11 +223,7 @@ void OneWire::write_bit(uint8_t v)
 // Read a bit. Port and bit is used to cut lookup time and provide
 // more certain timing.
 //
-#if defined(ARDUINO_ARCH_ESP32)
-uint8_t IRAM_ATTR OneWire::read_bit(void)
-#else
 uint8_t OneWire::read_bit(void)
-#endif
 {
 	IO_REG_TYPE mask IO_REG_MASK_ATTR = bitmask;
 	volatile IO_REG_TYPE *reg IO_REG_BASE_ATTR = baseReg;
@ -585,4 +577,4 @@ uint16_t OneWire::crc16(const uint8_t* input, uint16_t len, uint16_t crc)
 }
 #endif

-#endif
+#endif
--- a/lib/OneWire/OneWire.h
+++ b/lib/OneWire/OneWire.h
@ -99,18 +99,10 @@ class OneWire

    // Write a bit. The bus is always left powered at the end, see
    // note in write() about that.
-    #if defined (ARDUINO_ARCH_ESP32)
-    void IRAM_ATTR write_bit(uint8_t v);
-    #else
    void write_bit(uint8_t v);
-    #endif

    // Read a bit.
-    #if defined (ARDUINO_ARCH_ESP32)
-    uint8_t IRAM_ATTR read_bit(void);
-    #else
    uint8_t read_bit(void);
-    #endif

    // Stop forcing power onto the bus. You only need to do this if
    // you used the 'power' flag to write() or used a write_bit() call
@ -187,4 +179,4 @@ class OneWire
 #endif

 #endif // __cplusplus
-#endif // OneWire_h
+#endif // OneWire_h
--- a/lib/OneWire/util/OneWire_direct_gpio.h
+++ b/lib/OneWire/util/OneWire_direct_gpio.h
@ -127,10 +127,14 @@
 static inline __attribute__((always_inline))
 IO_REG_TYPE directRead(IO_REG_TYPE pin)
 {
+#if CONFIG_IDF_TARGET_ESP32C3
+    return (GPIO.in.val >> pin) & 0x1;
+#else // plain ESP32
    if ( pin < 32 )
        return (GPIO.in >> pin) & 0x1;
-    else if ( pin < 40 )
+    else if ( pin < 46 )
        return (GPIO.in1.val >> (pin - 32)) & 0x1;
+#endif

    return 0;
 }
@ -138,38 +142,38 @@ IO_REG_TYPE directRead(IO_REG_TYPE pin)
 static inline __attribute__((always_inline))
 void directWriteLow(IO_REG_TYPE pin)
 {
+#if CONFIG_IDF_TARGET_ESP32C3
+    GPIO.out_w1tc.val = ((uint32_t)1 << pin);
+#else // plain ESP32
    if ( pin < 32 )
        GPIO.out_w1tc = ((uint32_t)1 << pin);
-    else if ( pin < 34 )
+    else if ( pin < 46 )
        GPIO.out1_w1tc.val = ((uint32_t)1 << (pin - 32));
+#endif
 }

 static inline __attribute__((always_inline))
 void directWriteHigh(IO_REG_TYPE pin)
 {
+#if CONFIG_IDF_TARGET_ESP32C3
+    GPIO.out_w1ts.val = ((uint32_t)1 << pin);
+#else // plain ESP32
    if ( pin < 32 )
        GPIO.out_w1ts = ((uint32_t)1 << pin);
-    else if ( pin < 34 )
+    else if ( pin < 46 )
        GPIO.out1_w1ts.val = ((uint32_t)1 << (pin - 32));
+#endif
 }

 static inline __attribute__((always_inline))
 void directModeInput(IO_REG_TYPE pin)
 {
+#if CONFIG_IDF_TARGET_ESP32C3
+    GPIO.enable_w1tc.val = ((uint32_t)1 << (pin));
+#else
    if ( digitalPinIsValid(pin) )
    {
-        #if defined(ESP_ARDUINO_VERSION)
-        #if ESP_ARDUINO_VERSION >= ESP_ARDUINO_VERSION_VAL(2, 0, 0)
-        int pin_io = rtc_io_number_get((gpio_num_t)pin);
-        uint32_t rtc_reg(rtc_io_desc[pin_io].reg);
-
-        if ( rtc_reg ) // RTC pins PULL settings
-        {
-            ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_io_desc[pin_io].mux);
-            ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_io_desc[pin_io].pullup | rtc_io_desc[pin_io].pulldown);
-        }
-        #endif
-        #else
+#if ESP_IDF_VERSION_MAJOR < 4      // IDF 3.x ESP32/PICO-D4
        uint32_t rtc_reg(rtc_gpio_desc[pin].reg);

        if ( rtc_reg ) // RTC pins PULL settings
@ -177,40 +181,25 @@ void directModeInput(IO_REG_TYPE pin)
            ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_gpio_desc[pin].mux);
            ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_gpio_desc[pin].pullup | rtc_gpio_desc[pin].pulldown);
        }
-        #endif
-
+#endif
+	// Input
        if ( pin < 32 )
            GPIO.enable_w1tc = ((uint32_t)1 << pin);
        else
            GPIO.enable1_w1tc.val = ((uint32_t)1 << (pin - 32));
-
-        uint32_t pinFunction((uint32_t)2 << FUN_DRV_S); // what are the drivers?
-        pinFunction |= FUN_IE; // input enable but required for output as well?
-        pinFunction |= ((uint32_t)2 << MCU_SEL_S);
-
-        ESP_REG(DR_REG_IO_MUX_BASE + esp32_gpioMux[pin].reg) = pinFunction;
-
-        GPIO.pin[pin].val = 0;
    }
+#endif
 }

 static inline __attribute__((always_inline))
 void directModeOutput(IO_REG_TYPE pin)
 {
+#if CONFIG_IDF_TARGET_ESP32C3
+    GPIO.enable_w1ts.val = ((uint32_t)1 << (pin));
+#else
    if ( digitalPinIsValid(pin) && pin <= 33 ) // pins above 33 can be only inputs
    {
-        #if defined(ESP_ARDUINO_VERSION)
-        #if ESP_ARDUINO_VERSION >= ESP_ARDUINO_VERSION_VAL(2, 0, 0)
-        int pin_io = rtc_io_number_get((gpio_num_t)pin);
-        uint32_t rtc_reg(rtc_io_desc[pin_io].reg);
-
-        if ( rtc_reg ) // RTC pins PULL settings
-        {
-            ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_io_desc[pin_io].mux);
-            ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_io_desc[pin_io].pullup | rtc_io_desc[pin_io].pulldown);
-        }
-        #endif
-        #else
+#if ESP_IDF_VERSION_MAJOR < 4      // IDF 3.x ESP32/PICO-D4
        uint32_t rtc_reg(rtc_gpio_desc[pin].reg);

        if ( rtc_reg ) // RTC pins PULL settings
@ -218,21 +207,14 @@ void directModeOutput(IO_REG_TYPE pin)
            ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_gpio_desc[pin].mux);
            ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_gpio_desc[pin].pullup | rtc_gpio_desc[pin].pulldown);
        }
-        #endif
-
+#endif
+        // Output
        if ( pin < 32 )
            GPIO.enable_w1ts = ((uint32_t)1 << pin);
        else // already validated to pins <= 33
            GPIO.enable1_w1ts.val = ((uint32_t)1 << (pin - 32));
-
-        uint32_t pinFunction((uint32_t)2 << FUN_DRV_S); // what are the drivers?
-        pinFunction |= FUN_IE; // input enable but required for output as well?
-        pinFunction |= ((uint32_t)2 << MCU_SEL_S);
-
-        ESP_REG(DR_REG_IO_MUX_BASE + esp32_gpioMux[pin].reg) = pinFunction;
-
-        GPIO.pin[pin].val = 0;
    }
+#endif
 }

 #define DIRECT_READ(base, pin)          directRead(pin)
@ -445,6 +427,20 @@ void directWriteHigh(IO_REG_TYPE mask)
 #define DIRECT_MODE_INPUT(base, mask)    directModeInput(mask)
 #define DIRECT_MODE_OUTPUT(base, mask)   directModeOutput(mask)

+#elif defined(ARDUINO_ARCH_MBED_RP2040)|| defined(ARDUINO_ARCH_RP2040)
+#define delayMicroseconds(time)         busy_wait_us(time)
+#define PIN_TO_BASEREG(pin)             (0)
+#define PIN_TO_BITMASK(pin)             (pin)
+#define IO_REG_TYPE unsigned int
+#define IO_REG_BASE_ATTR
+#define IO_REG_MASK_ATTR
+#define DIRECT_READ(base, pin)          digitalRead(pin)
+#define DIRECT_WRITE_LOW(base, pin)     digitalWrite(pin, LOW)
+#define DIRECT_WRITE_HIGH(base, pin)    digitalWrite(pin, HIGH)
+#define DIRECT_MODE_INPUT(base, pin)    pinMode(pin,INPUT)
+#define DIRECT_MODE_OUTPUT(base, pin)   pinMode(pin,OUTPUT)
+#warning "OneWire. RP2040 in Fallback mode. Using API calls for pinMode,digitalRead and digitalWrite."
+
 #else
 #define PIN_TO_BASEREG(pin)             (0)
 #define PIN_TO_BITMASK(pin)             (pin)
@ -460,4 +456,4 @@ void directWriteHigh(IO_REG_TYPE mask)

 #endif

-#endif
+#endif
--- a/lib/mpu6050/I2Cdev.cpp
+++ b/lib/mpu6050/I2Cdev.cpp
@ -282,7 +282,8 @@ int8_t I2Cdev::readBytes(uint8_t devAddr, uint8_t regAddr, uint8_t length, uint8
                useWire->beginTransmission(devAddr);
                useWire->write(regAddr);
                useWire->endTransmission();
-                useWire->beginTransmission(devAddr);
+                // See: https://github.com/espressif/arduino-esp32/issues/6674
+                // useWire->beginTransmission(devAddr);
                useWire->requestFrom((uint8_t)devAddr, (uint8_t)min((int)length - k, I2CDEVLIB_WIRE_BUFFER_LENGTH));
        
                for (; useWire->available() && (timeout == 0 || millis() - t1 < timeout); count++) {
@ -1485,4 +1486,4 @@ uint16_t I2Cdev::readTimeout = I2CDEV_DEFAULT_READ_TIMEOUT;
        return rxBufferLength - rxBufferIndex;
    }

-#endif
+#endif
--- a/lib/mpu6050/I2Cdev.h
+++ b/lib/mpu6050/I2Cdev.h
@ -308,4 +308,4 @@ class I2Cdev {

 #endif // I2CDEV_IMPLEMENTATION == I2CDEV_BUILTIN_NBWIRE

-#endif /* _I2CDEV_H_ */
+#endif /* _I2CDEV_H_ */
--- a/lib/mpu6050/MPU6050.cpp
+++ b/lib/mpu6050/MPU6050.cpp
@ -66,7 +66,7 @@ void MPU6050_Base::initialize() {
 * @return True if connection is valid, false otherwise
 */
 bool MPU6050_Base::testConnection() {
-    return getDeviceID() == 0x34 || getDeviceID() == 0x38;  // Allow both MPU6050 and MPU6000
+    return getDeviceID() == 0x34;
 }

 // AUX_VDDIO register (InvenSense demo code calls this RA_*G_OFFS_TC)
@ -2556,8 +2556,8 @@ void MPU6050_Base::setClockSource(uint8_t source) {
 * -------------+------------------
 * 0            | 1.25 Hz
 * 1            | 2.5 Hz
- * 2            | 5 Hz
- * 3            | 10 Hz
+ * 2            | 20 Hz
+ * 3            | 40 Hz
 * </pre>
 *
 * For further information regarding the MPU-60X0's power modes, please refer to
@ -3371,25 +3371,27 @@ void MPU6050_Base::PID(uint8_t ReadAddress, float kP,float kI, uint8_t Loops){
 	resetDMP();
 }

-void MPU6050_Base::PrintActiveOffsets() {
-	uint8_t AOffsetRegister = (getDeviceID() < 0x38 )? MPU6050_RA_XA_OFFS_H:0x77;
-	int16_t Data[3];
-	//Serial.print(F("Offset Register 0x"));
-	//Serial.print(AOffsetRegister>>4,HEX);Serial.print(AOffsetRegister&0x0F,HEX);
-	Serial.print(F("\n//         X Accel  Y Accel  Z Accel   X Gyro   Y Gyro   Z Gyro\n// OFFSETS "));
-	if(AOffsetRegister == 0x06)	I2Cdev::readWords(devAddr, AOffsetRegister, 3, (uint16_t *)Data, I2Cdev::readTimeout, wireObj);
-	else {
-		I2Cdev::readWords(devAddr, AOffsetRegister, 1, (uint16_t *)Data, I2Cdev::readTimeout, wireObj);
-		I2Cdev::readWords(devAddr, AOffsetRegister+3, 1, (uint16_t *)Data+1, I2Cdev::readTimeout, wireObj);
-		I2Cdev::readWords(devAddr, AOffsetRegister+6, 1, (uint16_t *)Data+2, I2Cdev::readTimeout, wireObj);
-	}
-	//	A_OFFSET_H_READ_A_OFFS(Data);
-    Serial.print((float)Data[0], 5); Serial.print(",  ");
-    Serial.print((float)Data[1], 5); Serial.print(",  ");
-    Serial.print((float)Data[2], 5); Serial.print(",  ");
-	I2Cdev::readWords(devAddr, 0x13, 3, (uint16_t *)Data, I2Cdev::readTimeout, wireObj);
-	//	XG_OFFSET_H_READ_OFFS_USR(Data);
-    Serial.print((float)Data[0], 5); Serial.print(",  ");
-    Serial.print((float)Data[1], 5); Serial.print(",  ");
-    Serial.print((float)Data[2], 5); Serial.print("\n");
+int16_t * MPU6050_Base::GetActiveOffsets() {
+    uint8_t AOffsetRegister = (getDeviceID() < 0x38 )? MPU6050_RA_XA_OFFS_H:0x77;
+    if(AOffsetRegister == 0x06)	I2Cdev::readWords(devAddr, AOffsetRegister, 3, (uint16_t *)offsets, I2Cdev::readTimeout, wireObj);
+    else {
+        I2Cdev::readWords(devAddr, AOffsetRegister, 1, (uint16_t *)offsets, I2Cdev::readTimeout, wireObj);
+        I2Cdev::readWords(devAddr, AOffsetRegister+3, 1, (uint16_t *)(offsets+1), I2Cdev::readTimeout, wireObj);
+        I2Cdev::readWords(devAddr, AOffsetRegister+6, 1, (uint16_t *)(offsets+2), I2Cdev::readTimeout, wireObj);
+    }
+    I2Cdev::readWords(devAddr, 0x13, 3, (uint16_t *)(offsets+3), I2Cdev::readTimeout, wireObj);
+    return offsets;
 }
+
+void MPU6050_Base::PrintActiveOffsets() {
+    GetActiveOffsets();
+	//	A_OFFSET_H_READ_A_OFFS(Data);
+    Serial.print((float)offsets[0], 5); Serial.print(",\t");
+    Serial.print((float)offsets[1], 5); Serial.print(",\t");
+    Serial.print((float)offsets[2], 5); Serial.print(",\t");
+	
+	//	XG_OFFSET_H_READ_OFFS_USR(Data);
+    Serial.print((float)offsets[3], 5); Serial.print(",\t");
+    Serial.print((float)offsets[4], 5); Serial.print(",\t");
+    Serial.print((float)offsets[5], 5); Serial.print("\n\n");
+}
--- a/lib/mpu6050/MPU6050.h
+++ b/lib/mpu6050/MPU6050.h
@ -832,12 +832,16 @@ class MPU6050_Base {
 		void CalibrateAccel(uint8_t Loops = 15);// Fine tune after setting offsets with less Loops.
 		void PID(uint8_t ReadAddress, float kP,float kI, uint8_t Loops);  // Does the math
 		void PrintActiveOffsets(); // See the results of the Calibration
+		int16_t * GetActiveOffsets();

    protected:
        uint8_t devAddr;
        void *wireObj;
        uint8_t buffer[14];
        uint32_t fifoTimeout = MPU6050_FIFO_DEFAULT_TIMEOUT;
+    
+    private:
+        int16_t offsets[6];
 };

 #ifndef I2CDEVLIB_MPU6050_TYPEDEF
@ -845,4 +849,4 @@ class MPU6050_Base {
 typedef MPU6050_Base MPU6050;
 #endif

-#endif /* _MPU6050_H_ */
+#endif /* _MPU6050_H_ */
--- a/platformio.ini
+++ b/platformio.ini
@ -15,7 +15,7 @@ include_dir = lib
 [common_env_data]
 upload_speed = 921600
 monitor_speed =  115200
-platform = espressif8266 @ 3.2.0
+platform = espressif8266 @ 4.0.1
 framework = arduino
 board = d1_mini
 build_unflags = 
@ -33,16 +33,16 @@ build_flags =
 	-D EMBED_HTML			     				# If this is not used the html files needs to be on the file system (can be uploaded)
 	-D USER_SSID=\""\""           # =\""myssid\""
 	-D USER_SSID_PWD=\""\""       # =\""mypwd\""	
-	-D CFG_APPVER="\"1.0.0\""
-	#-D CFG_GITREV=\""beta-2\""
-	!python script/git_rev.py
+	-D CFG_APPVER="\"1.1.0\""
+	-D CFG_GITREV=\""beta-1\""
+	#!python script/git_rev.py
 lib_deps = # Switched to forks for better version control.
 	# Using local copy of these libraries
-  #https://github.com/jrowberg/i2cdevlib.git#<document> 		
-	#https://github.com/PaulStoffregen/OneWire
-	#https://github.com/milesburton/Arduino-Temperature-Control-Library
-	https://github.com/mp-se/ESP_WiFiManager#v1.9.0												# https://github.com/khoih-prog/ESP_WiFiManager
-	https://github.com/mp-se/ESP_DoubleResetDetector#v1.2.1						  	# https://github.com/khoih-prog/ESP_DoubleResetDetector
+  #https://github.com/mp-se/i2cdevlib.git#<document> 		
+	#https://github.com/mp-se/OneWire																		  # Using this version; https://github.com/arendst/Tasmota/tree/development/lib/lib_basic/OneWire-Stickbreaker
+	#https://github.com/mp-se/Arduino-Temperature-Control-Library
+	#https://github.com/khoih-prog/ESP_WiFiManager
+	#https://github.com/khoih-prog/ESP_DoubleResetDetector
 	https://github.com/mp-se/tinyexpr																		  #	https://github.com/codeplea/tinyexpr
 	https://github.com/mp-se/incbin																			  #	https://github.com/graphitemaster/incbin
 	https://github.com/mp-se/Arduino-Log#1.1.1    												# https://github.com/thijse/Arduino-Log
@ -128,7 +128,7 @@ board_build.filesystem = littlefs

 [env:gravity32-release]
 framework = arduino
-platform = espressif32 @ 3.5.0
+platform = espressif32 @ 5.0.0
 upload_speed = ${common_env_data.upload_speed}
 monitor_speed = ${common_env_data.monitor_speed}
 extra_scripts =  
@ -153,8 +153,8 @@ build_flags =
 	-D MAIN_DISABLE_LOGGING
 lib_deps = 
 	${common_env_data.lib_deps}
-	https://github.com/lorol/LITTLEFS#1.0.6
 	https://github.com/mp-se/NimBLE-Arduino#1.3.8	 # https://github.com/h2zero/NimBLE-Arduino
+lib_ignore = 
 board = featheresp32
 build_type = release
 board_build.partitions = part32.csv
@ -163,7 +163,7 @@ monitor_filters = esp32_exception_decoder

 [env:gravity32-perf]
 framework = arduino
-platform = espressif32 @ 3.5.0
+platform = espressif32 @ 5.0.0
 upload_speed = ${common_env_data.upload_speed}
 monitor_speed = ${common_env_data.monitor_speed}
 extra_scripts =  
@ -179,35 +179,9 @@ build_flags =
 	-D LOG_LEVEL=5
 lib_deps = 
 	${common_env_data.lib_deps}
-	https://github.com/lorol/LITTLEFS#1.0.6
 	https://github.com/mp-se/NimBLE-Arduino#1.3.8	 # https://github.com/h2zero/NimBLE-Arduino
 board = featheresp32
 build_type = release
 board_build.partitions = part32.csv
 board_build.filesystem = littlefs 
 monitor_filters = esp32_exception_decoder
-
-#[env:gravity32-release2]
-#framework = arduino
-#platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.3/platform-espressif32-2.0.2.3.zip # build fails
-#platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.2/platform-tasmota-espressif32-2.0.2.zip
-#platform = espressif32 @ 4.1.0
-#upload_speed = ${common_env_data.upload_speed}
-#monitor_speed = ${common_env_data.monitor_speed}
-#extra_scripts =  
-#	script/copy_html.py
-#	script/copy_firmware.py
-#	script/create_versionjson.py
-#build_unflags = 
-#	${common_env_data.build_unflags}
-#build_flags = 
-#	${common_env_data.build_flags}
-#	-D ESPRESSIF32_20 # v2.0 framework
-#	-D LOG_LEVEL=5 
-#lib_deps = 
-#	${common_env_data.lib_deps}
-#	https://github.com/mp-se/NimBLE-Arduino#1.3.8 # https://github.com/h2zero/NimBLE-Arduino
-#board = featheresp32
-#build_type = release
-#board_build.partitions = part32.csv 
-#board_build.filesystem = littlefs 
--- a/src/calc.cpp
+++ b/src/calc.cpp
@ -175,16 +175,15 @@ double calculateGravity(double angle, double temp, const char *tempFormula) {
 //
 // Source: https://homebrewacademy.com/hydrometer-temperature-correction/
 //
-double gravityTemperatureCorrectionC(double gravity, double tempC,
+double gravityTemperatureCorrectionC(double gravitySG, double tempC,
                                     double calTempC) {
 #if LOG_LEVEL == 6 && !defined(CALC_DISABLE_LOGGING)
  Log.verbose(F("CALC: Adjusting gravity based on temperature, gravity %F, "
                "temp %F, calTemp %F." CR),
-              gravity, tempC, calTempC);
+              gravitySG, tempC, calTempC);
 #endif
-  // float tempF = convertCtoF(tempC);
-  // float calTempF = convertCtoF(calTempC);
-
+  double tempF = convertCtoF(tempC);
+  double calTempF = convertCtoF(calTempC);
  const char *formula =
      "gravity*((1.00130346-0.000134722124*temp+0.00000204052596*temp^2-0."
      "00000000232820948*temp^3)/"
@ -193,7 +192,7 @@ double gravityTemperatureCorrectionC(double gravity, double tempC,

  // Store variable names and pointers.
  te_variable vars[] = {
-      {"gravity", &gravity}, {"temp", &tempC}, {"cal", &calTempC}};
+      {"gravity", &gravitySG}, {"temp", &tempF}, {"cal", &calTempF}};

  int err;
  // Compile the expression with variables.
@ -204,9 +203,10 @@ double gravityTemperatureCorrectionC(double gravity, double tempC,
    te_free(expr);

 #if LOG_LEVEL == 6 && !defined(CALC_DISABLE_LOGGING)
-    char s[10];
-    snprintf(&s[0], sizeof(s), "%.8f", g);
-    Log.verbose(F("CALC: Corrected gravity is %s." CR), &s[0]);
+    char s[80];
+    snprintf(&s[0], sizeof(s), "Corrected gravity=%.8f, input gravity=%.8f", g,
+             gravitySG);
+    Log.verbose(F("CALC: %s." CR), &s[0]);
 #endif
    return g;
  }
@ -215,7 +215,7 @@ double gravityTemperatureCorrectionC(double gravity, double tempC,
  errLog.addEntry(
      "CALC: Failed to parse expression for gravity temperature correction " +
      String(err));
-  return gravity;
+  return gravitySG;
 }

 // EOF
--- a/src/config.cpp
+++ b/src/config.cpp
@ -86,12 +86,14 @@ void Config::createJson(DynamicJsonDocument& doc) {
  doc[PARAM_PUSH_MQTT_USER] = getMqttUser();
  doc[PARAM_PUSH_MQTT_PASS] = getMqttPass();
  doc[PARAM_SLEEP_INTERVAL] = getSleepInterval();
-  doc[PARAM_VOLTAGEFACTOR] = getVoltageFactor();
+  doc[PARAM_VOLTAGE_FACTOR] = getVoltageFactor();
+  doc[PARAM_VOLTAGE_CONFIG] = getVoltageConfig();
  doc[PARAM_GRAVITY_FORMULA] = getGravityFormula();
  doc[PARAM_GRAVITY_FORMAT] = String(getGravityFormat());
  doc[PARAM_TEMP_ADJ] = getTempSensorAdjC();
  doc[PARAM_GRAVITY_TEMP_ADJ] = isGravityTempAdj();
  doc[PARAM_GYRO_TEMP] = isGyroTemp();
+  doc[PARAM_STORAGE_SLEEP] = isStorageSleep();

  JsonObject cal = doc.createNestedObject(PARAM_GYRO_CALIBRATION);
  cal["ax"] = _gyroCalibration.ax;
@ -253,14 +255,18 @@ bool Config::loadFile() {

  if (!doc[PARAM_SLEEP_INTERVAL].isNull())
    setSleepInterval(doc[PARAM_SLEEP_INTERVAL].as<int>());
-  if (!doc[PARAM_VOLTAGEFACTOR].isNull())
-    setVoltageFactor(doc[PARAM_VOLTAGEFACTOR].as<float>());
+  if (!doc[PARAM_VOLTAGE_FACTOR].isNull())
+    setVoltageFactor(doc[PARAM_VOLTAGE_FACTOR].as<float>());
+  if (!doc[PARAM_VOLTAGE_CONFIG].isNull())
+    setVoltageConfig(doc[PARAM_VOLTAGE_CONFIG].as<float>());
  if (!doc[PARAM_GRAVITY_FORMULA].isNull())
    setGravityFormula(doc[PARAM_GRAVITY_FORMULA]);
  if (!doc[PARAM_GRAVITY_TEMP_ADJ].isNull())
    setGravityTempAdj(doc[PARAM_GRAVITY_TEMP_ADJ].as<bool>());
  if (!doc[PARAM_GYRO_TEMP].isNull())
    setGyroTemp(doc[PARAM_GYRO_TEMP].as<bool>());
+  if (!doc[PARAM_STORAGE_SLEEP].isNull())
+    setStorageSleep(doc[PARAM_STORAGE_SLEEP].as<bool>());
  if (!doc[PARAM_GRAVITY_FORMAT].isNull()) {
    String s = doc[PARAM_GRAVITY_FORMAT];
    setGravityFormat(s.charAt(0));
--- a/src/config.hpp
+++ b/src/config.hpp
@ -146,9 +146,11 @@ class Config {
  String _otaURL = "";
  char _tempFormat = 'C';
  float _voltageFactor = 1.59;
+  float _voltageConfig = 4.15;
  float _tempSensorAdjC = 0;
  int _sleepInterval = 900;
  bool _gyroTemp = false;
+  bool _storageSleep = false;

  // Wifi Config
  String _wifiSSID[2] = {"", ""};
@ -184,7 +186,8 @@ class Config {

  // Gyro calibration and formula calculation data
  RawGyroData _gyroCalibration = {0, 0, 0, 0, 0, 0};
-  RawFormulaData _formulaData = {{0, 0, 0, 0, 0}, {1, 1, 1, 1, 1}};
+  RawFormulaData _formulaData = {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+                                 {1, 1, 1, 1, 1, 1, 1, 1, 1, 1}};

  void formatFileSystem();

@ -206,6 +209,12 @@ class Config {
    _saveNeeded = true;
  }

+  const bool isStorageSleep() { return _storageSleep; }
+  void setStorageSleep(bool b) {
+    _storageSleep = b;
+    _saveNeeded = true;
+  }
+
  const char* getOtaURL() { return _otaURL.c_str(); }
  void setOtaURL(String s) {
    _otaURL = s;
@ -370,6 +379,16 @@ class Config {
    _saveNeeded = true;
  }

+  float getVoltageConfig() { return _voltageConfig; }
+  void setVoltageConfig(float f) {
+    _voltageConfig = f;
+    _saveNeeded = true;
+  }
+  void setVoltageConfig(String s) {
+    _voltageConfig = s.toFloat();
+    _saveNeeded = true;
+  }
+
  float getTempSensorAdjC() { return _tempSensorAdjC; }
  void setTempSensorAdjC(float f) {
    _tempSensorAdjC = f;
--- a/src/gyro.cpp
+++ b/src/gyro.cpp
@ -43,7 +43,9 @@ bool GyroSensor::setup() {
  Wire.setClock(400000);  // 400kHz I2C clock. Comment this line if having
                          // compilation difficulties

-  if (!accelgyro.testConnection()) {
+  uint8_t id = accelgyro.getDeviceID();
+
+  if (id != 0x34 && id != 0x38) {  // Allow both MPU6050 and MPU6000
    ErrorFileLog errLog;
    errLog.addEntry(F("GYRO: Failed to connect to gyro, is it connected?"));
    _sensorConnected = false;
--- a/src/helper.cpp
+++ b/src/helper.cpp
@ -194,14 +194,8 @@ void printBuildOptions() {
 #ifdef SKIP_SLEEPMODE
               "SKIP_SLEEP "
 #endif
-#ifdef EMBED_HTML
-               "EMBED_HTML "
-#endif
 #ifdef COLLECT_PERFDATA
               "PERFDATA "
-#endif
-#ifdef ACTIVATE_OTA
-               "OTA "
 #endif
               CR),
             CFG_APPVER, CFG_GITREV, LOG_LEVEL);
--- a/src/main.cpp
+++ b/src/main.cpp
@ -38,7 +38,7 @@ SOFTWARE.
 #ifdef DEACTIVATE_SLEEPMODE
 const int interval = 1000;  // ms, time to wait between changes to output
 #else
-int interval = 200;  // ms, time to wait between changes to output
+int interval = 200;      // ms, time to wait between changes to output
 #endif
 bool sleepModeAlwaysSkip =
    false;  // Flag set in web interface to override normal behaviour
@ -50,9 +50,6 @@ uint32_t stableGyroMillis;  // Used to calculate the total time since last

 RunMode runMode = RunMode::gravityMode;

-//
-// Check if we should be in sleep mode
-//
 void checkSleepMode(float angle, float volt) {
 #if defined(SKIP_SLEEPMODE)
  runMode = RunMode::configurationMode;
@ -83,8 +80,12 @@ void checkSleepMode(float angle, float volt) {
    Log.notice(F("MAIN: Sleep mode disabled from web interface." CR));
 #endif
    runMode = RunMode::configurationMode;
-  } else if ((volt < 4.15 && (angle > 85 && angle < 95)) || (volt > 4.15)) {
+  } else if ((volt < myConfig.getVoltageConfig() &&
+              (angle > 85 && angle < 95)) ||
+             (volt > myConfig.getVoltageConfig())) {
    runMode = RunMode::configurationMode;
+  } else if (angle < 5 && myConfig.isStorageSleep()) {
+    runMode = RunMode::storageMode;
  } else {
    runMode = RunMode::gravityMode;
  }
@ -104,12 +105,26 @@ void checkSleepMode(float angle, float volt) {
                 volt);
 #endif
      break;
+    case RunMode::storageMode:
+#if !defined(MAIN_DISABLE_LOGGING)
+      Log.notice(F("MAIN: run mode STORAGE (angle=%F)." CR), angle);
+#endif
+      break;
+  }
+
+  // If we are in storage mode, just go back to sleep
+  if (runMode == RunMode::storageMode) {
+    Log.notice(
+        F("Main: Storage mode entered, going to sleep for maximum time." CR));
+#if defined(ESP8266)
+    ESP.deepSleep(ESP.deepSleepMax());
+#else
+#warning "Check and test the max deep sleep for esp32"
+    deepSleep(70 * 60);  // quick search on internet suggest max time is 70 min
+#endif
  }
 }

-//
-// Setup
-//
 void setup() {
  LOG_PERF_START("run-time");
  LOG_PERF_START("main-setup");
@ -358,11 +373,12 @@ void goToSleep(int sleepInterval) {
  deepSleep(sleepInterval);
 }

-//
-// Main loops
-//
 void loop() {
  switch (runMode) {
+    case RunMode::storageMode:
+      // This point is never reached, just here to remove warning.
+      break;
+
    case RunMode::configurationMode:
      if (myWifi.isConnected()) myWebServerHandler.loop();

--- a/src/main.hpp
+++ b/src/main.hpp
@ -29,7 +29,12 @@ SOFTWARE.
 #include <ArduinoLog.h>
 #include <stdlib.h>

-enum RunMode { gravityMode = 0, configurationMode = 1, wifiSetupMode = 2 };
+enum RunMode {
+  gravityMode = 0,
+  configurationMode = 1,
+  wifiSetupMode = 2,
+  storageMode = 3
+};
 extern RunMode runMode;

 #if defined(ESP8266)
@ -41,13 +46,8 @@ extern RunMode runMode;
 #define PIN_LED 2
 // #define PIN_A0 A0
 #else  // defined (ESP32)
-#if defined(ESPRESSIF32_20)
-#include <LittleFS.h>
-#else
-#include <LITTLEFS.h>
-#define LittleFS LITTLEFS
-#endif
 #include <FS.h>
+#include <LittleFS.h>
 #define ESPhttpUpdate httpUpdate
 #define ESP_RESET ESP.restart
 #define ESP8266WebServer WebServer
--- a/src/resources.hpp
+++ b/src/resources.hpp
@ -53,13 +53,15 @@ SOFTWARE.
 #define PARAM_PUSH_MQTT_PORT "mqtt-port"
 #define PARAM_SLEEP_INTERVAL "sleep-interval"
 #define PARAM_TEMPFORMAT "temp-format"
-#define PARAM_VOLTAGEFACTOR "voltage-factor"
+#define PARAM_VOLTAGE_FACTOR "voltage-factor"
+#define PARAM_VOLTAGE_CONFIG "voltage-config"
 #define PARAM_GRAVITY_FORMULA "gravity-formula"
 #define PARAM_GRAVITY_FORMAT "gravity-format"
 #define PARAM_GRAVITY_TEMP_ADJ "gravity-temp-adjustment"
 #define PARAM_TEMP_ADJ "temp-adjustment-value"
 #define PARAM_GYRO_CALIBRATION "gyro-calibration-data"
 #define PARAM_GYRO_TEMP "gyro-temp"
+#define PARAM_STORAGE_SLEEP "storage-sleep"
 #define PARAM_FORMULA_DATA "formula-calculation-data"
 #define PARAM_FILES "files"
 #define PARAM_FILE_NAME "file-name"
--- a/src/webserver.cpp
+++ b/src/webserver.cpp
@ -605,8 +605,10 @@ void WebServerHandler::webHandleConfigHardware() {
  Log.verbose(F("WEB : %s." CR), getRequestArguments().c_str());
 #endif

-  if (_server->hasArg(PARAM_VOLTAGEFACTOR))
-    myConfig.setVoltageFactor(_server->arg(PARAM_VOLTAGEFACTOR).toFloat());
+  if (_server->hasArg(PARAM_VOLTAGE_FACTOR))
+    myConfig.setVoltageFactor(_server->arg(PARAM_VOLTAGE_FACTOR).toFloat());
+  if (_server->hasArg(PARAM_VOLTAGE_CONFIG))
+    myConfig.setVoltageConfig(_server->arg(PARAM_VOLTAGE_CONFIG).toFloat());
  if (_server->hasArg(PARAM_TEMP_ADJ)) {
    if (myConfig.isTempC()) {
      myConfig.setTempSensorAdjC(_server->arg(PARAM_TEMP_ADJ));
@ -624,6 +626,12 @@ void WebServerHandler::webHandleConfigHardware() {
        _server->arg(PARAM_GYRO_TEMP).equalsIgnoreCase("on") ? true : false);
  else
    myConfig.setGyroTemp(false);
+  if (_server->hasArg(PARAM_STORAGE_SLEEP))
+    myConfig.setStorageSleep(
+        _server->arg(PARAM_STORAGE_SLEEP).equalsIgnoreCase("on") ? true
+                                                                 : false);
+  else
+    myConfig.setStorageSleep(false);

  myConfig.saveFile();
  _server->sendHeader("Location", "/config.htm#collapseHardware", true);
@ -1099,6 +1107,7 @@ void WebServerHandler::webHandleFormulaWrite() {
    fd.g[9] = _server->arg("g10").toDouble();
  }

+  fd.g[0] = 1;  // force first point to SG gravity of water
  myConfig.setFormulaData(fd);

  int e;
--- a/src_docs/source/conf.py
+++ b/src_docs/source/conf.py
@ -22,7 +22,7 @@ copyright = '2021-2022, Magnus Persson'
 author = 'Magnus Persson'

 # The full version, including alpha/beta/rc tags
-release = '1.0.0'
+release = '1.1.0'


 # -- General configuration ---------------------------------------------------
--- a/src_docs/source/configuration.rst
+++ b/src_docs/source/configuration.rst
@ -233,6 +233,11 @@ Hardware Settings

 Factor used to calcualate the battery voltage. If you get a too low/high voltage you can adjust this value.

+* **Config voltage:**
+
+Defines the level of voltage when the device should enter config mode due to charging. This might vary between different battery manufacturers. 
+If you dont what the device to go into configuration mode when charging, set this to 6V. 
+
 * **Temperature correction:**

 This value will be added to the temperature reading (negative value will reduce temperature reading). This is applied
@ -245,6 +250,12 @@ longer battery life (this is an experimental feature). The value used is the fir
 device is activated, since the gyro should be cool this is reflecting the surronding temperature. After it has 
 been running the value would be totally off.  

+* **Enable storage mode when placed on cap**
+
+When place on the cap (<5 degres tilt) the device will go into max sleep. In order to wake it up you need to do a reset (or wait for the device 
+to wake up). One option is to attach a magnetic reed switch (default open) to the reset pin and use a magnet to force a reset without opening 
+the tube. The reed switch is typically an electronic component of 14 mm long incapsulated in a small glass tube.
+
 * **Bluetooth: (Only ESP32)**

 If the build is using an ESP32 then you can send data over BLE, simulating a Tilt device. Choose the color that you want the device to simulate.
--- a/src_docs/source/data.rst
+++ b/src_docs/source/data.rst
@ -40,7 +40,7 @@ This is the format template used to create the json above.
  {
   "name" : "${mdns}",
   "ID": "${id}",
-   "token" : "gravmon",
+   "token" : "${token}",
   "interval": ${sleep-interval}, 
   "temperature": ${temp},
   "temp_units": "${temp-unit}",
@ -129,15 +129,6 @@ This is the format template used to create the json above.
  ispindel/${mdns}/interval:${sleep-interval}|
  ispindel/${mdns}/RSSI:${rssi}|

-This is a format template that is compatible with v0.6. Just replace the `topic` with the topic you want to post data to.
-
-.. code-block::
-   
-   topic:{"name":"gravmon", "ID":"${id}", "token":"gravmon", "interval": ${sleep-interval},
-   "temperature": ${temp}, "temp_units": "${temp-unit}", "gravity":${gravity},
-   "angle": ${angle}, "battery":${battery}, "rssi": ${rssi}, "corr-gravity":${corr-gravity},
-   "gravity-unit": "${gravity-unit}", "run-time": ${run-time}}|
-

 version.json
 ============
@ -150,13 +141,6 @@ they can be uploaded manually afterwards.

   { 
      "project":"gravmon", 
-      "version":"0.7.0",  
-      "html": [ 
-         "index.min.htm", 
-         "test.min.htm", 
-         "config.min.htm", 
-         "format.min.htm", 
-         "calibration.min.htm", 
-         "about.min.htm" 
-      ] 
+      "version":"1.0.0",  
+      "html": [ ] 
   }
--- a/src_docs/source/images/qa_1.png
+++ b/src_docs/source/images/qa_1.png
--- a/src_docs/source/index.rst
+++ b/src_docs/source/index.rst
@ -7,9 +7,9 @@ Welcome to GravityMon's documentation!
 ######################################

 .. note::
-  This documentation reflects **v1.0**. Last updated 2022-05-08
+  This documentation reflects **v1.1 BETA 1**. Last updated 2022-07-06

-* Docs for: `v0.8 <https://mp-se.github.io/gravitymon/v0.8/index.html>`_
+* Docs for: `v1.0 <https://mp-se.github.io/gravitymon/v1.0/index.html>`_
 * Docs for: `v0.9 <https://mp-se.github.io/gravitymon/v0.9/index.html>`_

 .. image:: images/gravitymon.gif
--- a/src_docs/source/installation.rst
+++ b/src_docs/source/installation.rst
@ -121,9 +121,14 @@ in the browser: **http://192.168.4.1**
 Before pressing save on the network infomration, make a note of the devicename that is shown on the screen, this will be the name that is used 
 in the next step to access the configuration pages. The link would look like this: **http://gravitymon56EA34.local**

+.. note::
+  When selecting a SSID in the list this will be populated in both wifi fields. This is the behaviour of the wifi manager library that I'm using,
+  in the future this is planned to be moved to the normal UI.
+
 Under wifi settings you can define a primary and seconday wifi SSID. The seconday will be used in case the primary fails. If the seconday is 
 successful then it will be used as primary. *The second wifi setting is optional and not needed.*

+
 .. image:: images/wifi.png
  :width: 200
  :alt: Wifi page
--- a/src_docs/source/q_and_a.rst
+++ b/src_docs/source/q_and_a.rst
@ -12,3 +12,20 @@ My device reports a temperature of -273C or -491F
 -------------------------------------------------
 - The DS18B20 temperature sensor cannot be found and this is the default value reported in this case.
 - Check the orienation of the sensor and soldering.
+
+Calibration error (unable to find a valid formula)
+--------------------------------------------------
+If you have issues to get a calibration formula. When a formula has been created the device always tries to validate the formula against the supplied values and if there is a to high deviation on any of the values then the formula will be rejected.
+
+The image here shows such a case, one of the values is out of bounds. 
+
+.. image:: images/qa_1.png
+  :width: 500
+  :alt: Calibration Error
+
+To fix these this you can;
+
+- remove the value from the list (setting the angle to zero will do that)
+- change the advanced setting (Formula max deviation) to a higher value and save the values again. 
+
+In the case above this paramater was changed from 1.6 SG to 4 SG and the formula was accepted. The deviation on this point was just above 3 SG. 
--- a/src_docs/source/releases.rst
+++ b/src_docs/source/releases.rst
@ -3,6 +3,40 @@
 Releases 
 ########

+v1.1.0
+======
+
+Documentation
+++++++++++++
+* Fixed errors in data format section
+* Added q&a on formula creation and value deviation
+* Added documentation for Brewpiless as target
+* Updated docs for ubidots service integration.
+* Added brewblox as new service
+
+User interface
++++++++++++++
+* Under format options its now possible to select brewfather ispindle format to avoid mixing endpoints. 
+* Added brewblox as format under format options. 
+* User can now edit the voltage level that forces the device into config mode (charging)
+
+Features
++++++++
+* Added storage mode which is activated under hardware setting. When place on the cap (<5 degres tilt) the device will go into 
+storage mode and sleep for the max allowed time. 
+ 
+Other
+++++
+* Upgraded framework for ESP8266 to v5.0.0
+* Upgraded framework for ESP32 to v2.0.2
+* Updated OneWire library to be complaint with new ESP32 SDK
+* Fixed issue in i2cdev connected to wrong usage of TwoWire on ESP32 (Gyro initialization hang). 
+
+Issues adressed
++++++++++++++++
+* BUG: Copy format templates used an old format for iSpindle and Gravmon where the token was not used.
+* BUG: Gravity correction formula not calculating correctly.
+
 v1.0.0
 ======

--- a/src_docs/source/services.rst
+++ b/src_docs/source/services.rst
@ -75,7 +75,9 @@ GravityMon can be installed and used as an iSpindle. Just register the device as
 UBIdots
 +++++++

-`UBIdots <https://www.ubidots.com>`_ is a IoT service that display data collected various sources. 
+`UBIdots <https://www.ubidots.com>`_ is a IoT service that display data collected various sources. There is a limitation on this service where it can only handle 10 variables per device so 
+you might need to reduce the number of values sent to the service. It will also treat every parameter as a number unless you create a custom device type and explicit define the string values 
+as text. This will require a paid subscription (as I interpret the documentation). The example format below will only send numbers so that should work fine with the paid subscription. 

 For this service there are two options to configure the integration. First you will need your default token which is found under `API Credentials` (<api-tokem> in the example below).
 Swap the text <devicename> with the name you want to show in ubidots. 
@ -264,3 +266,44 @@ starting with a ``?``. This string will be added to the URL above when doing the
 .. code-block::

   ?token=${token2}&v1=${temp}&v2=${gravity}&v3=${angle}
+
+
+Brewpiless
++++++++++
+
+If you connect the device to the brewpiless access point there is not way to access the user interface for configuration so it's recommended to connect the device to your normal network. 
+
+The device need to have a name starting with iSpindle, for example `iSpindel000`. Set the URL for one of the http POST targets to `http://ip/gravity` where ip is the ip adress of Brewpiless. 
+
+
+BrewBlox
++++++++++
+
+To send iSpindel data to brewblox over mqtt you need to modify the format template to match the expected format. Once you have configured the mqtt information you also need to update the format template 
+for this target. 
+
+This format template will post the expected json document on the topic, dont forget the `|` character at the end of the line which is needed to parse the payload. The first to words are the topic 
+name and after the first `:` this is the json playload. Text within the brackets will be used as the unit for the value and degC is displayed as °C. You can add other parameters under the data section 
+in the json document if you need other values as well.
+
+.. code-block::
+
+   brewcast/history:{"key":"${mdns}","data":{"Temperature[degC]": ${temp-c},"Temperature[degF]": ${temp-f},"Battery[V]":${battery},"Tilt[deg]":${angle},"Rssi[dBm]":${rssi},"SG":${gravity-sg},"Plato":${gravity-plato}}}|
+
+
+The json message on the mqtt topic  would look like this:
+
+.. code-block:: json
+
+   {
+      "key": "gravitymon",
+      "data": {
+         "Temperature[degC]": 27,
+         "Temperature[degF]": 80,
+         "Battery[V]": 4.1,
+         "Tilt[deg]": 25,
+         "Rssi[dBm]": -78,
+         "SG": 1,
+         "Plato": 0
+      }
+   }
--- a/test/config.json
+++ b/test/config.json
@ -20,8 +20,10 @@
    "mqtt-port": 1883,
    "mqtt-user": "user",
    "mqtt-pass": "pass",
+    "storage-sleep": true,
    "sleep-interval": 30,
    "voltage-factor": 1.59,
+    "voltage-config": 4.15,
    "gravity-formula": "0.0*tilt^3+0.0*tilt^2+0.0017978*tilt+0.9436",
    "gravity-format": "G",
    "temp-adjustment-value": 0,
Author	SHA1	Message	Date
Magnus	789eb32aa8	Merge branch 'dev' of https://github.com/mp-se/gravitymon into dev	2022-07-06 09:44:11 +02:00
Magnus Persson	c0db4dd8da	Precommit format	2022-07-06 09:43:48 +02:00
GitHub Action	cb677e10ae	GitHub Action Build	2022-07-06 07:14:25 +00:00
Magnus Persson	b4c7566a08	Bump docs version	2022-07-06 09:10:23 +02:00
Magnus Persson	70f391fa1a	Moved code for storage mode to apply in loop	2022-07-06 09:10:10 +02:00
Magnus Persson	542beffe4c	Added brewblox format template	2022-07-06 09:09:18 +02:00
Magnus	1a42bd332f	Merge branch 'dev' of https://github.com/mp-se/gravitymon into dev	2022-07-05 18:11:22 +02:00
GitHub Action	c16108352c	GitHub Action Build	2022-07-05 16:07:32 +00:00
Magnus Persson	4b5df951de	Precommit fix	2022-07-05 18:02:47 +02:00
Magnus Persson	6bbb904427	Fixed header case	2022-07-05 18:00:45 +02:00
Magnus Persson	66c6c44a38	precommit fixes	2022-07-05 17:58:14 +02:00
Magnus Persson	e2fee1fb35	Updated esp32 fwk	2022-07-05 17:55:05 +02:00
Magnus Persson	ae595ff50c	Updated one wire	2022-07-05 17:50:51 +02:00
Magnus Persson	50257e2805	Updated mpu libraries	2022-07-05 17:50:33 +02:00
Magnus Persson	c503ad88a9	Removed serial debug	2022-07-05 17:43:59 +02:00
Magnus Persson	5b7290c991	Remove warning	2022-07-04 09:51:49 +02:00
Magnus Persson	f7c43dad55	Checked in wifi libs to remove unwanted deps.	2022-07-04 09:47:49 +02:00
Magnus Persson	95654bac66	Updated docs	2022-07-04 09:46:31 +02:00
Magnus Persson	ffa7ac294d	Set limits on voltage config	2022-07-04 09:14:10 +02:00
Magnus Persson	79a3274286	Made config voltage configurable	2022-07-03 23:46:44 +02:00
Magnus Persson	0c936cfb88	merge master	2022-07-03 19:50:22 +02:00
Magnus Persson	f366b78cb3	merge master	2022-07-03 19:49:28 +02:00
Magnus Persson	702eba515d	Updated history	2022-07-03 19:44:56 +02:00
Magnus Persson	a992e90bc3	Fix #84	2022-07-03 13:20:24 +02:00
Magnus Persson	8b4b89ba20	Fixed storage deep sleep for esp32	2022-07-02 10:45:10 +02:00
Magnus Persson	361d287a22	Updated brewblox integration	2022-07-02 09:52:14 +02:00
Magnus Persson	8e36453b13	Merge branch 'dev' of https://github.com/mp-se/gravitymon into dev	2022-07-01 21:11:42 +02:00
Magnus Persson	ded06d15a1	Added storage mode	2022-07-01 21:11:10 +02:00
Magnus Persson	67f60b817e	Attempting to fix broken docs build	2022-07-01 09:42:25 +02:00
Magnus Persson	6373923506	Doc build pip upgrade	2022-07-01 09:30:16 +02:00
Magnus Persson	bf3a3de207	Added brewblox	2022-07-01 09:22:16 +02:00
GitHub Action	e6fd027d51	GitHub Action Build	2022-06-11 14:03:00 +00:00
Magnus Persson	0cba58a0dd	Bump library versions	2022-06-11 15:56:38 +02:00
Magnus	fd71a2d428	Create stale.yaml	2022-06-04 14:40:20 +02:00
Magnus Persson	907e33ce2d	Updated ubidots docs	2022-05-26 08:55:25 +02:00
Magnus Persson	18ba0b225f	Merge branch 'dev' of https://github.com/mp-se/gravitymon into dev	2022-05-26 08:38:37 +02:00
GitHub Action	2a9472b453	GitHub Action Build	2022-05-25 20:42:49 +00:00
Magnus Persson	0b23a0f69e	Updated rel notes	2022-05-25 22:39:46 +02:00
Magnus Persson	9cba1db4e5	Merge branch 'dev' of https://github.com/mp-se/gravitymon into dev	2022-05-25 22:38:23 +02:00
Magnus Persson	9d5d6a5a58	Added brewfather ispindle copy format	2022-05-25 22:38:11 +02:00
GitHub Action	58fe408803	GitHub Action Build	2022-05-25 18:54:46 +00:00
Magnus Persson	c2ae70bb1a	#64 fix format, bump ver	2022-05-25 20:50:22 +02:00
Magnus Persson	7a3b048d80	Fixed errors in docs	2022-05-18 07:12:37 +02:00
Magnus	ad3fbb7270	Merge branch 'master' into dev	2022-05-16 19:20:14 +02:00
Magnus Persson	02df656343	Added qa on formula creation	2022-05-16 19:19:00 +02:00
GitHub Action	f73f63fec3	GitHub Action Build	2022-05-16 06:09:36 +00:00
Magnus	bb09072520	Upd pre-commit	2022-05-16 08:04:26 +02:00
GitHub Action	5875ee83d8	GitHub Action Build	2022-05-15 08:31:09 +00:00
Magnus Persson	6185d67d12	Fix pre-commit fail	2022-05-15 10:26:21 +02:00
Magnus Persson	00f82f5c37	Added pre-commit action	2022-05-15 10:24:02 +02:00
Magnus Persson	59ad285bb8	Updated pre-commit hooks	2022-05-15 10:23:01 +02:00
Magnus Persson	bc09d617fc	Force g0 to water	2022-05-15 10:22:49 +02:00
Magnus Persson	a71f54b99f	Brewpiless docs	2022-05-15 10:05:06 +02:00
Magnus Persson	152ff89bf6	Set rfd grav to 1	2022-05-15 09:55:01 +02:00